Smart Battery Protect VICTRON ENERGY 65A

Because without a battery, life in a van becomes less and less fun, opt for this intelligent battery protection system.

If the voltage in your electrical system is too low, Battery Protect will automatically disconnect the battery from its non-essential loads. The aim? To prevent the battery from discharging completely, which would not only be highly problematic but could also damage it.

This intelligent battery protector will also disconnect the battery in the event of a power surge. Because electricity means safety...

With a capacity of 65A, this model can be connected to a 12V or 24V battery. Even easier to use, the Smart BatteryProtect is equipped with Bluetooth® technology. You can set up and control it using the Victron Connect application installed on your phone or tablet!
Activate / deactivate Bluetooth as you wish and program the BatteryProtect directly from the box (using the programming pin supplied). You can also view the selected mode and disconnection thresholds directly on the digital display.

Equipped with an "alarm" output, the device can also be connected to a buzzer to warn you in the event of a voltage drop or overvoltage. The system will automatically disconnect the battery 90 seconds after the alarm is triggered if you do not intervene in the meantime.

A real must-have for securing your electrical installation!

Technical specifications :

• Maximum continuous charging current: 65A
• Peak (30 seconds): 250A
• Operating voltage range: 6-35V
• Bluetooth® technology
• Current consumption (Bluetooth on): 1.4mA
• Current consumption (Bluetooth off): 1.2mA
• Maximum load on alarm output: 50mA (short-circuit protected)
• Adjustable disconnection and reconnection times
• Adjustable disconnection and reconnection thresholds
• IP67 standard (electronic components)
• IP00 standard (connectors)
• Connection: M6
• Mounting torque: 5Nm
• Weight: 200g
• Dimensions: 40 x 48 x 106mm
• 5-year warranty