6-way or 12-way fuse holder: protect yourself from short circuits in your converted van!

Every electrical installation in a converted utility vehicle has a suitable fuse holder. This fuse box has 2 inputs: one positive and one negative. These inputs will each be connected directly by an H07-VK cable to another piece of equipment according to your wiring diagram. For each positive terminal screw on the fuse holder, there is a negative terminal screw.

Made from flame-retardant materials that are resistant to high temperatures PBT (Polybutylene terephthalate), the 6-way fuse holder will allow you to power 6 separate circuits to protect 6 of your live equipment. While the 12-way fuse holder will allow you to power 12 different circuits and will protect 12 of your live equipment.

This multi-fuse holder has been specially designed for DC circuits carrying voltages up to 32V. Ideal for connection to 12V or 24V electrical circuits in a converted vehicle!

Insulate your connections perfectly with our heat-shrink tubing.

Terminal block fuse holder for automotive blade fuses type ATC/ATO

Using the terminal block fuse holder, each circuit in your electrical installation will be protected by an automotive blade fuse ranging from 5A minimum to 20A maximum.

How to identify a blown fuse following a short circuit?

Each fuse slot has a warning LED light. If one of your fuses has blown following a short circuit or other failure, the LED will light up red.

Thanks to this illuminated LED, you can easily identify the fuse that needs changing. This 6-way or 12-way fuse holder provides real protection for you and your electrical installation during your travels in your converted van!

How do I install a 6-way or 12-way fuse holder in my vehicle?

Whether the 6-way or 12-way fuse holder, their housing has 4 pre-drilled holes at each corner for easy screwing.

Technical specifications

• 6-way or 12-way fuse holder (to be chosen according to your needs)
• Nominal voltage: 32V DC
• Maximum electrical current of 20A per circuit and 100A per panel.
• Housing material: PBT (Polybutylene terephthalate)
• Mounting of terminals by screwing onto the positive and negative inputs.
• Compatible with H07-VK electrical cable with nominal cross-section in mm² of your choice
• Compatible with pre-insulated ring terminals Ø 6mm (M6)
• Compatible with automotive blade fuses type: ATC/ATO

Included with the 6-way fuse holder:

• A housing with 6 slots for blade fuses with transparent cover (i.e. the fuse holder), 2 x 20A fuses, 2 x 15A fuses, 1 x 10A fuse, 1 x 5A fuse, 4 fixing screws, self-adhesive sticker sheet with English labelling.

Included with the 12-way fuse holder:

• A housing with 12 slots for blade fuses with transparent cover (i.e. the fuse holder), 6 x 20A fuses, 6 x 15A fuses, 6 x 10A fuses, 6 x 5A fuses, 4 fixing screws, self-adhesive sticker sheet with English labelling.