A built-in fridge in a van, is it possible?!

Of course, provided 2 conditions are met: leave sufficient space between the side wall of a vehicle and the rear part of a refrigerator; ensure adequate ventilation.

The UNO 6 is formed by the LB104 lower cabinet as well as 2 finishing side panels (CF740) on which an area with several perforations ensures optimal ventilation of the fridge. The latter will not suffer any malfunction and will not risk overheating. For proper installation within the UNO 6, we recommend that you carefully read the instructions for your appliance.

The presence of a small door (P7) on the highest part of this module allows you to slide a chopping board, a tea towel or any small object on top of your 12V refrigerator.

The UNO 6 worktop will serve to place personal belongings necessary for your daily road trip. It is even possible to place a removable gas stove on it to cook your meals.

For impeccable edges protected from impacts, consider our finishing profile!

Modular and complementary to other LONGBOARD elements

Heode has designed the LONGBOARD range so that every traveller can create the conversion of their dreams immediately or as they go on their adventures!

The UNO 6 can be modified to combine with other LONGBOARD lower and/or upper unit elements. Feel free to browse our complete LONGBOARD packs that can be installed in your van.

Plan your travels, Heode takes care of the equipment!

Materials

For this UNO 6 LONGBOARD pack:

The structural cabinet (LB104) is made of raw birch plywood, 15mm thick. The exterior panels (1 small door, 2 finishing side panels, 1 plinth, 1 worktop) benefit from a laminate coating with a colour combination left to your choice: Cream white / Birch; Agave green / Birch; Graphite grey / Birch; etc.

This finish gives the LONGBOARD surface elements excellent resistance to stains and unintentional scratches. In case of minor damage, clean your furniture easily with a clean cloth.

The wood we have chosen for the manufacture of the LONGBOARD range is none other than birch. Renowned for its strength and proven reliability, Heode has been using it since its inception for its collections of flat-pack furniture for utility vehicles being converted.

By adding high-pressure laminate, we bring a touch of colour and modernity to our furniture while increasing the quality!

The advantages of the UNO 6 LONGBOARD pack

• Complementary: The UNO 6 can be combined with other LONGBOARD lower and/or upper elements available on our website. With it, several combinations are possible.
• Clever: It can be transformed into a mini kitchen using a mobile gas stove! Plus, all your food is within reach. The small niche above the fridge can hold some accessories or kitchen equipment.
• Safety +++: The UNO 6 guarantees maximum and permanent ventilation, preventing any risk of overheating of the 12V compression refrigerator.
• Appearance: The small door (P7) as well as the worktop, finishing side panels and simple plinth of the UNO 6 feature a laminate with a colour combination of your choice.
• Easy assembly: Screws and installation instructions included.

The technical specifications of the UNO 6 LONGBOARD pack

• Overall dimensions of the UNO 6 (WxHxD): 450x755x450 mm.
• Structure: 15mm thick birch plywood.
• Surface elements: High-pressure laminate (HPL) birch plywood.
• The small door (P7) is reversible.
• Not compatible with the wheel arch.
• Compatible with compression refrigerators: CARBEST LR40L; CARBEST LR50L; CARBEST CV50L (products sold separately on our website).
• Screws provided.
• Assembly instructions provided.
• Side wall fixing kit provided.
• Quick floor fixing kit provided.
• Compatibility: 100% of utility vehicles.