LONGBOARD - 3/4" right-hand sliding door front - P12

Make your LB102 pedestal stand out!

This door front (P12) 3/4 must be fitted to the door front (P5) 1/4 to create the right-hand sliding door needed to close the LB102 pedestal.

For it to be functional, you must at least opt for the configuration: LB103 central pedestal + LB102 right-hand sliding door pedestal.

Made from 15 mm HPL laminated birch plywood, like the other surface elements in our LONGBOARD range. It's not intrusive, but it's great to have, because it slides quietly and will never get in your way. In fact, when it's open, it's in front of the central fixed door (P6) of the LB103 central pedestal.

What's more, it's resistant to knocks, stains and scratches thanks to its HPL-coated surface. If your cupboard door (P12) gets spilt with wine, yoghurt, jam or anything else, don't worry, it's easy to clean.

A wood that combines strength and lightness for modular van furniture

Our team chose birch plywood laminated with HPL for the top and bottom surfaces of the LONGBOARD. This type of birch has already proved its worth for our kit furniture. The perfect condition of our Fontana and Oceanside furniture kits, varnished with Rubio Monocoat or Osmo TopOil and after intensive use by our customers, is proof of this. This wood stands out for its robustness and aesthetic appeal. Covered with an HPL laminate, it is guaranteed to last.

Naturally light, it's the ideal ally for a good van layout while optimising its payload. With its top and bottom finishing elements, the LONGBOARD side unit will suit every interior style, whatever your configuration!

Compatibility and assembly of the 3/4 right-hand sliding door front

To take advantage of the features specific to the LB102 right-hand sliding door pedestal, 2 configurations are available:

• lB103 central pedestal + central fixed door front (P6) + LB102 right-hand sliding door pedestal + 1/4 sliding door front (P5) + 3/4 right-hand sliding door front (P12)
• base unit for sliding door to left LB101 + sliding door front 1/4 (P5) + sliding door front left 3/4 (P4) + central base unit LB103 + central fixed door front (P6) + base unit for sliding door to right LB102 + sliding door front 1/4 (P5) + sliding door front right 3/4 (P12)

Recess the 1/4 (P5) sliding door front into the 3/4 (P12) right-hand sliding door front to create a sliding door that closes the LB102 pedestal completely.

In plain English, the configuration is as follows:

• 1/4 sliding door front (P5) + 3/4 right sliding door front (P12)

As you can see, the door front (P12) cannot be installed on its own and must be combined with the door front (P5).

The LB102 base unit can be fitted with shelves (ET1) for a variety of storage options. They are compatible with all base units and the LONGBOARD top unit.

Technical characteristics of the 3/4 right sliding door front

• Dimensions (WxHxD): 000x487x15 mm.
• Material: HPL laminated birch plywood.
• Thickness: 15 mm.
• Compatible with base unit: LB102.
• Compatible with door front: (P5) 1/4.
• Please note that the 3/4 (P12) right sliding door front must always be assembled with the 1/4 (P5) sliding door front. Without the front panel (P5), the front panel (P12) cannot be installed.
• Compatible with shelves: (ET1).
• Fasteners supplied.
• Assembly instructions supplied.