A sandwich sealing gasket to durably protect your projecting windows from water ingress

Faced with water ingress, unwanted draughts and the natural wear of original gaskets on projecting windows, this sandwich sealing gasket provides a reliable solution for your van, campervan or motorhome windows. Its design combines a soft foam bead and a self-adhesive butyl inner face, ensuring reinforced sealing between the window and the wall without requiring any additional adhesive or sealant.

An integrated groove allows for the insertion of a finishing strip, to neatly conceal the fixing staples and give the interior installation a clean finish. Whether you are replacing an ageing gasket or fitting a window such as the RW REAR, this profile adapts to the thickness of your wall thanks to its two variants, for a quick, drill-free installation and lasting interior comfort.

Sold per linear metre, it allows you to order the exact quantity needed for your project, without any waste. Its rubber material offers good resistance to UV rays and weather variations, for lasting durability even with regular use on the road.

How to install the sandwich sealing gasket?

Clean and degrease the perimeter of the opening before installation. Position the profile on the interior side of the wall, all the way around the window frame, then press firmly along the entire length to activate the butyl face and ensure adhesion. If you wish to achieve a neat finish, insert a finishing strip into the dedicated groove to conceal the staples. No additional sealant adhesive is required for fixing the gasket itself; if you are also fitting the glazing or frame, an MS Polymer sealant adhesive remains useful for glazing sealing.

Technical specifications of the sandwich sealing gasket

• Profile type: self-sealing sandwich profile for projecting window
• Colour: black
• Inner face: self-adhesive butyl for reinforced sealing
• Foam bead: soft foam ensuring compression against the wall
• Integrated groove: for inserting a finishing strip (sold separately)
• Fitting method: interior side of the opening, no additional adhesive required for the gasket itself
• Packaging: sold per linear metre
• Indicative compatibility: projecting windows of vans, campervans and motorhomes
• Wall thickness: from 28 to 32 mm
• SOLD PER LINEAR METRE: 1 in the basket = 1 metre

Additional accessories (sold separately)

• RW REAR window
• Interior frame for RW REAR window
• Finishing profile for sealing gasket
• MS Polymer sealant adhesive