Professional cork spray gun | SOLIEGE

What tool should I use to apply sprayed cork in my van?

Apply natural cork coating with ease using this professional spray gun with a 5-litre cup. Easy to assemble and connect to an air hose, which in turn is connected to a compressor.

This plastering gun has been designed to spray granulated natural cork evenly onto all types of surface. This gun is an indispensable ally for spray cork insulation on the sheet metal surfaces of a commercial vehicle.

How do I fit the plastering gun?

Basically, all you need to do is :

• Attach the 5-litre cup to the gun in the appropriate place
• Check or modify the nozzle
• Connect an air hose to the nozzle on the gun
• Test the gun mechanism (trigger engagement, air flow)

Find out more about using a plastering gun with SOLIEGE natural cork plaster.

What's the best cork plaster spray gun for use in a vehicle?

The Heode team, concerned about the quality of its equipment, has selected a top-quality professional plastering gun for you. Designed for indoor use, this gun is easy to handle. Supplied with three separate nozzles. When you unpack it, one of them is already fitted to the gun.

To change this nozzle, you need to :

• disconnect the air inlet
• unscrew the clamping ring
• unscrew the nozzle
• screw on the desired nozzle
• screw the clamping ring back on

Be sure to disconnect the compressor and air hose from your plastering gun before: filling the cup; changing the nozzles; cleaning the equipment with clean water.

The Heode team invites you to read the plastering gun instructions for proper assembly, use and cleaning. Keep your professional equipment in good condition!

What are the special features of the spray cork gun?

• Plastering gun with 5L cup
• Cup material: Aluminium
• Cup capacity: 5 litres
• Supplied with 3 nozzles: 4, 6 and 8 mm
• Material flow rate: 228 L/min
• Maximum pressure: 4 Bar
• Instructions for use supplied