Monitor the charge of your solar installation without opening your electrical compartment

When the controller or charger of your electrical installation is housed in a technical compartment, under the bench or in a storage unit, it can be difficult to know at a glance where your auxiliary battery charge stands. The MT-2 solar monitor makes your life easier: connected to your MPPT solar charge controller or a compatible charger, this remote LCD screen displays in real time the charge voltage and current, the power and voltage of your solar panels, as well as the accumulated capacity (Ah) and energy (Wh).

This housing mounts wherever you choose - dashboard, kitchen unit, near the sleeping area - so you can keep an eye on your solar output without having to dismantle or reopen your electrical installation at every check. Compatible with MPPT controllers as well as BS and B2B (battery-to-battery via the alternator) series chargers, this control screen is equally suited to monitoring a solar installation or a charge from the vehicle's alternator while on the road.

The LED backlight is adjustable from 0 to 100% depending on ambient brightness, and an automatic standby mode turns off the display after 2 minutes without charge to avoid unnecessarily draining the battery. A 3-second press on the on/off button resets the amp-hour counters at any time, handy for tracking a new charging session or a new journey. With its compact dimensions of 110 x 110 x 40 mm, this monitor easily fits on any surface in your conversion, without encroaching on your living space.

How to install the MT-2 solar monitor?

The installation requires no drilling of the bodywork: only the housing needs to be fixed at the chosen location. Connect the monitor cable to the dedicated port on your MPPT solar charge controller or compatible BS/B2B charger, fix the housing in the desired position, then power up the system: the screen will automatically display the charging data, with no additional settings required.

Technical specifications of the MT-2 solar monitor

• Device type: remote LCD control screen for solar charge controller or battery charger
• Compatibility: BS (battery) and B2B (battery-to-battery / alternator) series chargers from the Energie Mobile brand
• Displayed data: charge voltage and current, PV power and voltage, charge capacity (Ah), charge energy (Wh), battery voltage
• Working voltage: 12V or 24V DC
• Input voltage range: 8 to 32V DC
• Operating current: 3 to 30 mA
• Supported solar power: 20 to 999 Wp
• LCD display area: 49 x 28 mm
• Backlight: LED, adjustable from 0 to 100%
• Automatic standby after 2 minutes without charge
• Ah counter reset by long press (3 seconds) on the on/off button
• Dimensions: 110 x 110 x 40 mm
• Weight: 75 g