DAMADE Foot Pump ø 113 mm - The Simple Water Solution Without Electricity for Your Van

Easily create an autonomous water point in your converted van, camper van, or motorhome! The DAMADE foot pump operates mechanically, without the need for electricity. It's a robust, economical and simple-to-install solution for on-demand water.

Are you looking for a reliable and basic way to have tap water in your conversion? This DAMADE mechanical foot pump is ideal. By simply pressing with your foot, you activate the internal diaphragm which draws water from your tank or jerry can and sends it to a spout.

The advantages of the DAMADE foot pump

• 💧 100% Mechanical Operation: No need for battery or electrical connection. Ideal for simple and energy-efficient water circuits.
• 👍 Simple and Robust: Proven design, easy to use and built to last.
• 🛠️ Easy Installation: Fixes directly to the floor with a few screws (not supplied).
• 📏 Compact: With a diameter of 113 mm and a height of 70 mm, it easily finds its place on the floor, near your water point.
• 🔗 Standard Connections: Equipped with two barbed fittings for standard water hose with 10 mm diameter (internal).
• 🌊 Practical Flow Rate: Provides a flow rate of approximately 3.5 litres per minute, sufficient for washing up or washing hands.
• ✅ Reliable: Neoprene diaphragm mechanism.

Detailed Description

The DAMADE foot pump is a classic piece of equipment for converted vehicles. Its main advantage is its complete independence from electricity. It's the perfect solution if you want a minimalist, reliable water system with no electrical consumption.

It is usually installed on the floor, near the sink or washbasin. You connect it on one side to your water supply (jerry can, flexible or rigid tank) and on the other to a simple spout (tap without opening/closing control). The action of pumping with your foot makes the water flow; as soon as you stop pumping, the water stops.

Installation and Use Advice

• Securely fix the pump to the floor using 3 screws of type 5 x 20 mm (not included).
• Ensure that the pump's inclination does not exceed 20° for optimal operation.
• Use reinforced hose with 10 mm internal diameter for inlet and outlet connections. Secure connections with hose clamps (sold separately).
• This pump is ideal for use with a simple spout (without valve), as it is the pumping action that controls the water flow.

Technical Specifications

Frequently Asked Questions (FAQ)

What is the flow rate of this pump?

The flow rate is approximately 3.5 litres per minute when you pump actively.

Does it need electricity to operate?

No, this pump is entirely mechanical and requires no electrical power supply.

What type of tap should be used with this pump?

It is recommended to use a simple spout (tap without switch or valve). Water only flows when you operate the pump with your foot.

What diameter hose should be used?

The pump is designed for flexible hoses (preferably reinforced) with an internal diameter of 10 mm.

How is the pump fixed?

It screws directly onto the floor using 3 screws (not supplied). It is advisable not to exceed an inclination of 20°.

Is the pump noisy?

No, operation is generally quiet, you will mainly hear the sound of water and the slight mechanical movement of the pedal.

Can hot water be pumped?

These pumps are primarily designed for cold water. Use with hot water could damage the diaphragm or reduce its lifespan. It is best to use it only for cold or room temperature water.

Is the pump self-priming?

Yes, foot pumps are generally self-priming over short vertical distances (typically from a jerry can placed on the ground next to the pump).

The simple solution for your autonomous water point

Add the DAMADE foot pump to your basket for a reliable, economical water solution without electricity in your van or camper. Don't forget the hose, clamps and a suitable spout!