Large volume, natural hygroscopic regulation for your L3H2

The Armaflex ChezMoi insulates your L3H2 van from floor to ceiling, including the walls and reinforcements.

On a large van, insulating tight corners can quickly become a headache: the Biofib Trio, fitted on the doors alongside the Armaflex ChezMoi, insulates naturally thanks to its composition of hemp, flax and cotton, while maintaining its volume over time. A vapour retarder secures the whole against condensation. Cork insulates the floor. Quantities already calibrated for this format, adhesives and accessories included.

Compatible with L3H2 vans on the market (Renault Master, Fiat Ducato, Citroën Jumper, Peugeot Boxer, Ford Transit, Mercedes Sprinter, Volkswagen Crafter and equivalents), this kit covers walls, ceiling, doors, wheel arches and floor.

• Quantities calibrated for an L3H2: no calculations needed on your part, even for this large format.
• Armaflex ChezMoi, designed for the van: unlike the former AF, which was designed for construction.
• Natural hygroscopic regulation: the Biofib Trio absorbs and releases moisture.
• Insulation that covers everything: walls, ceiling, doors, wheel arches and floor.
• Designed and manufactured in France: hemp, flax and cotton, 85% French-sourced.

Composition of the L3H2 insulation kit

Walls, ceiling and structural reinforcements

• Armaflex ChezMoi 19 mm self-adhesive — 3 rolls of 6 m²
• Armaflex ChezMoi 10 mm self-adhesive — 1 roll of 10 m² (reinforcements and uprights)
• Armaflex Cleaner — 2 surface preparation cleaners
• Armaflex ChezMoi Tape — 2 rolls of 15 m for joints

Doors

• Biofib Trio 45 mm — 5 panels
• Proclima Intello vapour retarder — 3 rolls
• Double-sided tape specially designed for vapour retarders

Wheel arches

• Armaflex ChezMoi 10 mm self-adhesive (quantity included above)

Floor

• 4 mm cork roll — 2 rolls of 4 m²
• High-performance spray adhesive — 2 units

Materials chosen for their role in insulation

Armaflex ChezMoi — the insulation designed for the van

The successor to the Armaflex AF, the ChezMoi uses the same closed-cell technology in a formulation designed from the outset for van conversions rather than construction. Its integrated vapour barrier means there is no need to add a separate vapour retarder to the walls and ceiling.

• Role in the kit: walls, ceiling, reinforcements, wheel arches
• Thickness / packaging: 19 mm (6 m² roll) and 10 mm (10 m² roll)
• Thermal conductivity (λ): 0.035 W/(m·K)
• Integrated vapour barrier: closed cells, no vapour retarder to add
• Antimicrobial treatment: Microban®, integrated into the material
• Service temperature: -50 °C to +85 °C
• VOC emissions: A+ rating (ISO 16 000)
• Manufacturer's warranty: 10 years
• Origin / manufacture: Europe, Armacell technology

Biofib Trio — the natural insulator for hard-to-reach areas

Made from hemp, flax and cotton (85% French-sourced), the Biofib Trio is designed and manufactured in France. Its natural hygroscopic regulation helps prevent excess moisture in the vehicle, and its structure does not compress even after thousands of kilometres.

• Role in the kit: doors
• Thickness / packaging: 45 mm (0.75 m² panel)
• Density: 30 kg/m³
• Thermal conductivity (λ): 0.038 W/(m·K)
• Thermal resistance (R): 1.15 m²·K/W
• Hygroscopic regulation: yes, permeable to water vapour (µ ≤ 2)
• Long-term durability: does not compress, natural spring-back effect
• Origin / manufacture: France, 85% French supply chain (hemp, flax, cotton)

Cork — the natural floor insulator

Naturally rot-proof and moisture-resistant, cork insulates the floor without adding unnecessary thickness. Its lightness and flexibility make it an easy solution to apply with spray adhesive, directly onto the metal sheet.

• Role in the kit: floor
• Thickness / packaging: 4 mm (4 m² roll)
• Moisture resistance: rot-proof, naturally water-resistant
• Origin / manufacture: natural material