Easy-fit Armaflex ChezMoi insulation kit for Volkswagen Transporter L1H1
Easy-fit Armaflex ChezMoi insulation kit for Volkswagen Transporter L1H1
Ready-to-fit insulation kit for the Volkswagen Transporter L1H1: 22 m² of self-adhesive Armaflex ChezMoi, with everything you need to install it.
- 1 roll of Armaflex ChezMoi 10 mm (10 m²)
- 2 rolls of Armaflex ChezMoi 19 mm (12 m²)
- 2 rolls of Tape (15 m × 50 mm)
- 1 Cleaner (1 L bottle)
- 1 pair of gloves and 1 utility knife included free
Integrated vapour barrier, no extra glue needed, 10-year manufacturer’s warranty.
Quantities calculated for the Volkswagen Transporter L1H1, excluding the cab partition.
22 m² of Armaflex ChezMoi, calculated to insulate your Volkswagen Transporter L1H1
This kit brings together all the Armaflex ChezMoi you need to insulate a Volkswagen Transporter L1H1 for a campervan conversion: 1 roll of 10 mm, 2 rolls of 19 mm, 2 rolls of Tape and 1 Cleaner, plus a free pair of gloves and utility knife. The quantities are calculated for the Transporter L1H1: order everything at once, without having to estimate the area or add missing products.
Armaflex ChezMoi is an elastomeric foam made in Europe using Armacell technology. Its self-adhesive side sticks directly to cleaned metal panels, with no extra glue needed. Its closed cells also act as a vapour barrier (μ> 7 000): there is no separate vapour control layer to install, and less condensation forms on the metal panels.
With a thermal conductivity of 0,035 W/(m·K) and an operating range of −50 °C to +85 °C, it insulates against both cold and heat, whether you convert your Transporter into a campervan or keep it as a work van. The A+ rating (ISO 16000, VOC-free) and Microban® antimicrobial treatment integrated into the material matter in a space where you sleep. Its fire reaction meets the FMVSS automotive standard, and the manufacturer guarantees the material for 10 years.
Using the kit is simple: the 10 mm goes on the floor and uprights, the 19 mm on the walls and ceiling, the Tape seals the joins, and the Cleaner cleans the metal panels before installation.
Armaflex ChezMoi 19 mm: insulate the walls and ceiling
The 19 mm is the standard thickness for large areas. It provides the most insulation where space allows: on the Transporter’s side walls, doors and ceiling. The kit contains 2 rolls, or 12 m².
- Thickness: 19 mm
- Packaging: 6 m² roll (6 m × 1 m)
- Thermal conductivity: λ = 0,035 W/(m·K) at 0 °C
- Vapour barrier: integrated, μ> 7 000
- Operating temperature: −50 °C to +85 °C
- Fire reaction: FMVSS automotive standard
- Air quality: A+ rating (ISO 16000), VOC-free
- Antimicrobial treatment: Microban® integrated into the material
- Warranty: 10 years (manufacturer)

Armaflex ChezMoi 10 mm: insulate the floor and uprights
The 10 mm fits where space is tight: the floor, deep reinforcements, wheel arches and uprights. It preserves headroom while insulating the metal panels. The kit contains 1 roll, or 10 m².
- Thickness: 10 mm
- Packaging: 10 m² roll (10 m × 1 m)
- Thermal conductivity: λ = 0,035 W/(m·K) at 0 °C
- Vapour barrier: integrated, μ> 7 000
- Operating temperature: −50 °C to +85 °C
- Fire reaction: FMVSS automotive standard
- Air quality: A+ rating (ISO 16000), VOC-free
- Antimicrobial treatment: Microban® integrated into the material
- Warranty: 10 years (manufacturer)

Tape, Cleaner, gloves and utility knife: preparation, cutting and sealing joins
Tape seals the joins between sheets to reduce thermal bridging, while Cleaner degreases the metal panels for good adhesion. The kit contains 2 rolls of Tape, providing 30 m of tape, and 1 Cleaner. A pair of gloves and a utility knife are included free for handling and cutting the insulation.
- Tape: 15 m × 50 mm adhesive roll, 2 included in the kit
- Cleaner: solvent-based Armaflex cleaner, 1 L bottle, applied with a cloth, 1 included in the kit
- Gloves: 1 pair, included free with the kit
- Utility knife: 1, included free with the kit

Compatibility: Volkswagen Transporter L1H1
The kit is sized for the load area of a Volkswagen Transporter L1H1 panel van, T5, T6 or T6.1 generation: 2 572 mm long, 1 692 mm wide and 1 410 mm high. These measurements are approximate: measure your vehicle before installation, especially if it has already been converted.
The latest-generation Transporter (T7) is built on a different platform, with a different load area: this kit is not suitable for it.
Please note: The partition between the load area and cab is not included in the areas covered by the kit.
Because the closed cells of Armaflex ChezMoi already act as a vapour barrier, no separate vapour control layer is needed.
Other Transporter sizes: L1H2, L2H1 and L2H2.
How do I install the Armaflex ChezMoi kit in a Volkswagen Transporter L1H1?
Armaflex ChezMoi is self-adhesive: it can be installed without glue, using a few simple tools, and requires no special skills. Just follow the steps in order. Our blog article on installing Armaflex explains each step in detail.
- Prepare the panels. Identify the areas to insulate. If you plan to install wooden lining, fit the fixing battens first.
- Clean the panels before installation. Dampen a clean cloth with Cleaner and wipe down all the metal panels: they must be clean and degreased for the adhesive to stick. Cleaner contains a solvent and gives off fumes: wear a mask and work outside if possible.
- Mark out. Mark the dimensions of each area on the non-adhesive side of the insulation, starting with the floor and uprights (10 mm), then the walls and ceiling (19 mm).
- Cut. Put on the free gloves and cut the sheets to shape using the utility knife in the kit, or an Armacell knife kit if you prefer. The foam cuts cleanly.
- Stick down. Peel away the protective film as you go, pressing the sheet onto the metal panel from the centre outwards to push out the air.
- Seal the joins. Apply Tape over each join between two sheets to reduce thermal bridging.
Kit technical specifications
| Specification | Armaflex ChezMoi 10 mm | Armaflex ChezMoi 19 mm |
|---|---|---|
| Quantity in the kit | 1 roll | 2 rolls |
| Area covered by the kit | 10 m² | 12 m² |
| Packaging | 10 m × 1 m | 6 m × 1 m |
| Recommended areas | Floor, uprights | Walls, ceiling |
| Thermal conductivity | λ = 0,035 W/(m·K) at 0 °C | λ = 0,035 W/(m·K) at 0 °C |
| Water vapour resistance | μ> 7 000 | μ> 7 000 |
| Operating temperature | −50 °C to +85 °C | −50 °C to +85 °C |
| Fire reaction | FMVSS automotive standard | FMVSS automotive standard |
| Air quality | A+ (ISO 16000), VOC-free | A+ (ISO 16000), VOC-free |
| Antimicrobial treatment | Integrated Microban® | Integrated Microban® |
| Warranty | 10 years (manufacturer) | 10 years (manufacturer) |
The kit also contains 2 rolls of Tape (15 m × 50 mm), 1 solvent-based Cleaner (1 L bottle), plus a free pair of gloves and utility knife.
Frequently asked questions about insulating a Volkswagen Transporter L1H1
How can I tell if my Transporter is an L1H1?
The Transporter panel van comes with a short (L1) or long (L2) wheelbase, and our kits cover the standard roof (H1) and high roof (H2). Measure the usable floor length and interior height: approximately 2 572 mm for L1 and 2 975 mm for L2, 1 410 mm for H1 and 1 635 mm for H2.
Do I need DIY skills to install this kit?
No. The insulation is self-adhesive and can be cut with the utility knife included free in the kit: clean, cut, stick, then seal the joins with Tape. The six steps in the installation section are all you need, and the video shows you how.
Do I need to add glue?
No, the self-adhesive side of Armaflex ChezMoi sticks directly to the metal panels. Cleaner is used only to degrease them so the adhesive bonds properly.
Is this kit suitable for a Volkswagen Caravelle?
It is designed for a panel van Transporter being converted into a campervan. The Volkswagen Caravelle, a glazed passenger version with an existing interior trim, does not have the same areas to insulate: measure the areas you need to cover before choosing how much Armaflex to buy.
Can I double the thickness for very cold conditions?
Yes, you can layer two sheets in exposed areas if you travel in very cold conditions. You will need to add rolls of Armaflex ChezMoi 19 mm to the kit.
Armaflex ChezMoi or Armaflex AF: what’s the difference?
Armaflex ChezMoi is the successor to Armaflex AF for vehicle conversions: the same self-adhesive foam, with a fire reaction rating under the FMVSS automotive standard. Our article compares the two ranges point by point.
Is this kit suitable for a Transporter T5, T6 or T6.1?
Yes. The Transporter T5, T6 and T6.1 panel vans have the same load area: the L1H1 kit fits all three generations. The latest-generation Transporter (T7) is built on a different platform and is not covered.
Complete the insulation and interior finish of your Volkswagen Transporter L1H1
This kit insulates the metal panels in one go. To go further with environmentally responsible materials, explore our campervan insulation kits.
For the floor, add a layer of 4 mm cork underlay on a roll beneath your floor covering: it reduces the feeling of a cold floor and cuts down vibrations and road noise. Explore the full cork insulation range.
To cover the insulation, Heode offers wooden linings cut to fit the Transporter: side panels and flooring for the T5 (2003 to 2015), and side panels, ceiling lining and flooring for the T6 (2015 to 2019). Find the full range in the Transporter T5 and T6 linings category.
For the wall finish, start with a stretch felt sample: you can choose the colour (light grey, dark grey, anthracite, black or beige) in your van before ordering the van lining felt.
-
Best selling