Easy Armaflex ChezMoi insulation kit for Volkswagen Transporter L2H1

New

Easy Armaflex ChezMoi insulation kit for Volkswagen Transporter L2H1

2.567_VWT_L2H1
€378.77 Inc. VAT

Ready-to-install insulation kit for Volkswagen Transporter L2H1: 22 m² of self-adhesive Armaflex ChezMoi, with everything you need to install it.

  • 1 roll of Armaflex ChezMoi 10 mm (10 m²)
  • 2 rolls of Armaflex ChezMoi 19 mm (12 m²)
  • 2 rolls of Tape (15 m × 50 mm)
  • 1 Cleaner (1 L bottle)
  • 1 pair of gloves and 1 utility knife included free

 

Integrated vapour barrier, no additional glue needed, 10-year manufacturer’s warranty.

Quantities calculated for the Volkswagen Transporter L2H1, excluding the cab partition.

Pack products My pack description
Pack contents

22 m² of Armaflex ChezMoi with a 10-year warranty to insulate your Volkswagen Transporter L2H1

The manufacturer provides a 10-year warranty on Armaflex ChezMoi: a material you can rely on for long-lasting insulation in a Volkswagen Transporter L2H1. This kit contains the quantities calculated for the Transporter L2H1: 1 roll of 10 mm insulation, 2 rolls of 19 mm insulation, 2 rolls of Tape and 1 Cleaner, plus a complimentary pair of gloves and a utility knife.

Armaflex ChezMoi is an elastomeric foam made in Europe using Armacell technology. Its self-adhesive side sticks directly to cleaned metal bodywork, with no additional glue. Its closed cells also act as a vapour barrier (μ> 7 000): there is no separate vapour control layer to install, and less condensation forms on the metal.

With a thermal conductivity of 0,035 W/(m·K) and an operating range of −50 °C to +85 °C, it insulates against both cold and heat, whether you convert your Transporter into a campervan or keep it as a work van. The A+ rating (ISO 16000, VOC-free) and Microban® antimicrobial treatment integrated into the material matter in a space where you sleep. Its fire performance meets the automotive FMVSS standard, and the manufacturer guarantees the material for 10 years.

The kit is straightforward to use: the 10 mm insulation is for the floor and uprights, the 19 mm insulation for the walls and ceiling, the Tape for sealing joints and the Cleaner for cleaning the metal bodywork before installation.

 

Armaflex ChezMoi 19 mm: insulate the walls and ceiling

The 19 mm insulation is the standard thickness for large areas. It provides the most insulation where space allows: the Transporter’s side walls, doors and ceiling. The kit contains 2 rolls, covering 12 m².

  • Thickness: 19 mm
  • Packaging: 6 m² roll (6 m × 1 m)
  • Thermal conductivity: λ = 0,035 W/(m·K) at 0 °C
  • Vapour barrier: integrated, μ> 7 000
  • Operating temperature: −50 °C to +85 °C
  • Fire performance: automotive FMVSS standard
  • Air quality: A+ rating (ISO 16000), VOC-free
  • Antimicrobial treatment: Microban® integrated into the material
  • Warranty: 10 years (manufacturer)

 

Van insulation: installing Armaflex ChezMoi

 

Armaflex ChezMoi 10 mm: insulate the floor and uprights

The 10 mm insulation fits where space is tight: the floor, deep reinforcements, wheel arches and uprights. It preserves headroom while insulating the metal bodywork. The kit contains 1 roll, covering 10 m².

  • Thickness: 10 mm
  • Packaging: 10 m² roll (10 m × 1 m)
  • Thermal conductivity: λ = 0,035 W/(m·K) at 0 °C
  • Vapour barrier: integrated, μ> 7 000
  • Operating temperature: −50 °C to +85 °C
  • Fire performance: automotive FMVSS standard
  • Air quality: A+ rating (ISO 16000), VOC-free
  • Antimicrobial treatment: Microban® integrated into the material
  • Warranty: 10 years (manufacturer)

 

Armaflex ChezMoi insulation cut to the right width with a utility knife

 

Tape, Cleaner, gloves and utility knife: preparation, cutting and joints

Tape seals the joints between insulation sheets to limit thermal bridging, while Cleaner degreases the metal bodywork for good adhesion. The kit contains 2 rolls of Tape, giving you 30 m of tape, and 1 Cleaner. A pair of gloves and a utility knife are included free for handling and cutting the insulation.

  • Tape: 15 m × 50 mm adhesive roll, 2 in the kit
  • Cleaner: solvent-based Armaflex cleaner, 1 L bottle, applied with a cloth, 1 in the kit
  • Gloves: 1 pair, included free with the kit
  • Utility knife: 1, included free with the kit

 

Armaflex ChezMoi insulation joint covered with Tape

 

Compatibility: Volkswagen Transporter L2H1

The kit is sized for the load area of a Volkswagen Transporter L2H1 panel van, T5, T6 or T6.1 generation: 2 975 mm long, 1 692 mm wide and 1 410 mm high. These dimensions are indicative: measure your vehicle before installation, especially if it has already been converted.

The latest-generation Transporter (T7) is built on a different platform and has a different load area: this kit does not fit it.

Please note: The partition between the load area and the cab is not included in the areas covered by the kit.

The closed cells of Armaflex ChezMoi already act as a vapour barrier, so no separate vapour control layer is needed.

Other Transporter sizes: L1H1, L1H2 and L2H2.

 

How do you install the Armaflex ChezMoi kit in a Volkswagen Transporter L2H1?

Armaflex ChezMoi is self-adhesive: it can be installed without glue, using a few simple tools, and requires no special skills. Just follow the steps in order. Our blog article on installing Armaflex explains each step in detail.

  1. Prepare the walls. Identify the areas to insulate. If you plan to fit wooden lining, install the fixing battens first.
  2. Clean the walls before installation. Dampen a clean cloth with Cleaner and wipe down all the metal bodywork: it must be clean and free of grease for the adhesive to bond. Cleaner contains a solvent and gives off fumes: wear a mask and work outside if possible.
  3. Mark out. Mark the dimensions of each area on the non-adhesive side of the insulation, starting with the floor and uprights (10 mm), then the walls and ceiling (19 mm).
  4. Cut to size. Put on the complimentary gloves and cut the sheets to shape with the utility knife in the kit, or with an Armacell knife kit if you prefer. The foam cuts cleanly.
  5. Stick in place. Peel off the backing gradually, pressing the insulation sheet onto the metal from the centre outwards to push out the air.
  6. Seal the joints. Apply Tape over every joint between two insulation sheets to limit thermal bridging.

 

 

Kit technical specifications

Specification Armaflex ChezMoi 10 mm Armaflex ChezMoi 19 mm
Quantity in the kit 1 roll 2 rolls
Area covered by the kit 10 m² 12 m²
Packaging 10 m × 1 m 6 m × 1 m
Recommended areas Floor, uprights Walls, ceiling
Thermal conductivity λ = 0,035 W/(m·K) at 0 °C λ = 0,035 W/(m·K) at 0 °C
Water vapour resistance μ> 7 000 μ> 7 000
Operating temperature −50 °C to +85 °C −50 °C to +85 °C
Fire performance Automotive FMVSS standard Automotive FMVSS standard
Air quality A+ (ISO 16000), VOC-free A+ (ISO 16000), VOC-free
Antimicrobial treatment Integrated Microban® Integrated Microban®
Warranty 10 years (manufacturer) 10 years (manufacturer)

 

The kit also contains 2 rolls of Tape (15 m × 50 mm), 1 solvent-based Cleaner (1 L bottle), plus 1 complimentary pair of gloves and 1 utility knife.

 

Frequently asked questions about insulating a Volkswagen Transporter L2H1

How can I tell if my Transporter is an L2H1?

The Transporter panel van comes with a short (L1) or long (L2) wheelbase, and our kits cover the standard roof (H1) and high roof (H2). Measure the usable floor length and interior height: approximately 2 572 mm for L1 and 2 975 mm for L2, and 1 410 mm for H1 and 1 635 mm for H2.

 

Do I need DIY experience to install this kit?

No. The insulation is self-adhesive and can be cut with the utility knife included free in the kit: clean, cut and stick it in place, then seal the joints with Tape. Just follow the six steps in the installation section; the video shows you how.

 

Do I need to add glue?

No, the self-adhesive side of Armaflex ChezMoi sticks directly to the metal bodywork. Cleaner is used only to degrease it so the adhesive bonds properly.

 

Is this kit suitable for a Volkswagen Caravelle?

This kit is designed for a panel van Transporter being converted into a campervan. The Volkswagen Caravelle is a glazed passenger version with an existing interior lining, so it does not have the same areas to insulate: measure the areas you need to cover before choosing how much Armaflex to buy.

 

Can I double the thickness for very cold conditions?

Yes, you can layer two sheets in exposed areas if you travel in very cold conditions. You will need to add rolls of Armaflex ChezMoi 19 mm to the kit.

 

Armaflex ChezMoi or Armaflex AF: what’s the difference?

Armaflex ChezMoi is the successor to Armaflex AF for vehicle conversions: the same self-adhesive foam, with fire performance that meets the automotive FMVSS standard. Our article compares the two ranges point by point.

 

Is this kit suitable for a Transporter T5, T6 or T6.1?

Yes. Transporter T5, T6 and T6.1 panel vans have the same load area: the L2H1 kit fits all three generations. The latest-generation Transporter (T7), built on a different platform, is not covered.

 

Complete the insulation and interior finish of your Volkswagen Transporter L2H1

This kit insulates the metal bodywork in one go. To take things further with eco-friendly materials, explore our campervan insulation kits.

For the floor, add a layer of 4 mm cork underlay on a roll beneath your floor covering: it reduces the feeling of a cold floor and reduces vibrations and road noise. Explore the full cork insulation range.

To cover the insulation, Heode offers wooden lining cut to fit the Transporter: side panels and flooring for the T5 (2003 to 2015), and side panels, ceiling panels and flooring for the T6 (2015 to 2019). Find the full range in the Transporter T5 and T6 lining category.

For the wall finish, start with a stretch felt sample: you can choose the colour (light grey, dark grey, anthracite, black or beige) in your van before ordering the van lining felt.