Easy insulation kit Armaflex ChezMoi Fiat Talento L1H1
Easy insulation kit Armaflex ChezMoi Fiat Talento L1H1
Ready-to-install insulation kit for Fiat Talento L1H1: 22 m² of self-adhesive Armaflex ChezMoi, with everything you need to install it in one kit.
- 1 roll of Armaflex ChezMoi 10 mm (10 m²)
- 2 rolls of Armaflex ChezMoi 19 mm (12 m²)
- 2 rolls of Tape (15 m × 50 mm)
- 1 Cleaner (1 L bottle)
- 1 pair of gloves and 1 utility knife included free
Integrated vapour barrier, no extra glue needed, 10-year manufacturer’s guarantee.
Quantities calculated for the Fiat Talento L1H1, excluding the cab partition.
22 m² of Armaflex ChezMoi calculated to insulate your Fiat Talento L1H1
This kit brings together all the Armaflex ChezMoi you need to insulate a Fiat Talento L1H1 for a campervan conversion: 1 roll of 10 mm, 2 rolls of 19 mm, 2 rolls of Tape and 1 Cleaner, with a pair of gloves and a utility knife included free. The quantities are calculated for the Talento L1H1: order everything at once, with no need to estimate areas or add missing items.
Armaflex ChezMoi is an elastomeric foam made in Europe using Armacell technology. Its self-adhesive side sticks directly to clean metalwork, with no extra glue needed. The closed cells also act as a vapour barrier (μ> 7 000): there is no separate vapour control layer to install, and less condensation forms on the metalwork.
With a thermal conductivity of 0,035 W/(m·K) and an operating temperature range of −50 °C to +85 °C, it insulates against both cold and heat, whether you convert your Talento into a campervan or keep it as a work van. The A+ rating (ISO 16000, VOC-free) and Microban® antimicrobial treatment built into the material matter in a space where you sleep. Its reaction to fire meets the FMVSS automotive standard, and the manufacturer guarantees the material for 10 years.
The kit is straightforward to use: the 10 mm insulation goes on the floor and pillars, the 19 mm insulation on the walls and ceiling, the Tape seals the joins, and the Cleaner cleans the metalwork before installation.
Armaflex ChezMoi 19 mm: insulate the walls and ceiling
The 19 mm insulation is the standard thickness for large areas. It provides the most insulation where space allows: the Talento’s side walls, doors and ceiling. The kit contains 2 rolls, covering 12 m².
- Thickness: 19 mm
- Pack size: 6 m² roll (6 m × 1 m)
- Thermal conductivity: λ = 0,035 W/(m·K) at 0 °C
- Vapour barrier: integrated, μ> 7 000
- Operating temperature: −50 °C to +85 °C
- Reaction to fire: FMVSS automotive standard
- Air quality: A+ rating (ISO 16000), VOC-free
- Antimicrobial treatment: Microban® built into the material
- Guarantee: 10 years (manufacturer)

Armaflex ChezMoi 10 mm: insulate the floor and pillars
The 10 mm insulation fits where space is tight: the floor, deep reinforcing ribs, wheel arches and pillars. It preserves interior height while insulating the metalwork. The kit contains 1 roll, covering 10 m².
- Thickness: 10 mm
- Pack size: 10 m² roll (10 m × 1 m)
- Thermal conductivity: λ = 0,035 W/(m·K) at 0 °C
- Vapour barrier: integrated, μ> 7 000
- Operating temperature: −50 °C to +85 °C
- Reaction to fire: FMVSS automotive standard
- Air quality: A+ rating (ISO 16000), VOC-free
- Antimicrobial treatment: Microban® built into the material
- Guarantee: 10 years (manufacturer)

Tape, Cleaner, gloves and utility knife: preparation, cutting and sealing joins
The Tape seals the joins between sheets to limit thermal bridging, while the Cleaner degreases the metalwork for good adhesion. The kit contains 2 rolls of Tape, giving you 30 m of tape, and 1 Cleaner. A pair of gloves and a utility knife are included free for handling and cutting the insulation.
- Tape: 15 m × 50 mm roll, adhesive, 2 in the kit
- Cleaner: solvent-based Armaflex cleaner, 1 L bottle, applied with a cloth, 1 in the kit
- Gloves: 1 pair, included free with the kit
- Utility knife: 1 utility knife, included free with the kit

Compatibility: Fiat Talento L1H1
The kit is sized for the load area of a Fiat Talento L1H1 panel van from 2016 to 2021: 2 537 mm long, 1 662 mm wide and 1 387 mm high, with 1 268 mm between the wheel arches. These measurements are a guide: measure your vehicle before installation, especially if it has already been converted.
The Fiat Talento sold since 2024 is built on a different, larger platform: this kit does not fit it.
Please note: The partition separating the cab is not included in the areas covered by the kit.
The closed cells of Armaflex ChezMoi already act as a vapour barrier, so there is no need for a separate vapour control layer.
The Talento L1H1 has shared its bodywork with the Renault Trafic since 2014: see the Renault Trafic L1H1 kit. It also fits Nissan NV300 and Opel Vivaro (2014-2019) vans of the same size, built on the same platform. Other Talento sizes: L1H2 and L2H1.
How do I install the Armaflex ChezMoi kit in a Fiat Talento L1H1?
Armaflex ChezMoi is self-adhesive: it installs without glue, using a few simple tools, and requires no special skills. Just follow the steps in order. Our blog article on installing Armaflex explains each step in detail.
- Prepare the walls. Identify the areas to insulate. If you plan to fit wood panelling, install your fixing battens first.
- Clean the walls before installation. Moisten a clean cloth with Cleaner and wipe down all the metalwork: it must be clean and free of grease for the adhesive to bond. Cleaner contains a solvent and gives off fumes: wear a mask and work outside if possible.
- Mark out. Transfer the dimensions of each area onto the non-adhesive side of the insulation, starting with the floor and pillars (10 mm), then the walls and ceiling (19 mm).
- Cut. Put on the gloves included free and cut the sheets to shape with the utility knife in the kit, or with an Armacell knife kit if you prefer. The foam cuts cleanly.
- Stick. Peel off the protective film as you go, pressing the sheet onto the metalwork from the centre outwards to remove trapped air.
- Seal the joins. Apply Tape over every join between two sheets to limit thermal bridging.
Kit technical specifications
| Specification | Armaflex ChezMoi 10 mm | Armaflex ChezMoi 19 mm |
|---|---|---|
| Quantity in the kit | 1 roll | 2 rolls |
| Area in the kit | 10 m² | 12 m² |
| Pack size | 10 m × 1 m | 6 m × 1 m |
| Recommended areas | Floor, pillars | Walls, ceiling |
| Thermal conductivity | λ = 0,035 W/(m·K) at 0 °C | λ = 0,035 W/(m·K) at 0 °C |
| Water vapour resistance | μ> 7 000 | μ> 7 000 |
| Operating temperature | −50 °C to +85 °C | −50 °C to +85 °C |
| Reaction to fire | FMVSS automotive standard | FMVSS automotive standard |
| Air quality | A+ (ISO 16000), VOC-free | A+ (ISO 16000), VOC-free |
| Antimicrobial treatment | Integrated Microban® | Integrated Microban® |
| Guarantee | 10 years (manufacturer) | 10 years (manufacturer) |
The kit also contains 2 rolls of Tape (15 m × 50 mm), 1 solvent-based Cleaner (1 L bottle), plus 1 pair of gloves and 1 utility knife included free.
Frequently asked questions about insulating a Fiat Talento L1H1
How do I know if my Talento is an L1H1?
The Talento panel van comes in two lengths (L1, L2) and two roof heights (H1, H2). Measure the usable floor length and interior height: approximately 2 537 mm for L1 and 2 937 mm for L2, 1 387 mm for H1 and 1 898 mm for H2.
Do I need DIY skills to install this kit?
No. The insulation is self-adhesive and can be cut with the utility knife included free in the kit: clean, cut, stick, then seal the joins with Tape. The six steps in the installation section are all you need, and the video shows you how.
Do I need to add glue?
No, the self-adhesive side of Armaflex ChezMoi sticks directly to the metalwork. The Cleaner is only used to degrease it so the adhesive bonds properly.
Is this kit suitable for a Fiat Talento Combi?
It is designed for a panel van Talento being converted into a campervan. The Fiat Talento Combi is a glazed passenger version with an existing interior trim, so it does not have the same areas to insulate: measure the areas you need to cover before deciding how much Armaflex to order.
Can I double the thickness for very cold conditions?
Yes, you can layer two sheets in exposed areas if you travel in very cold conditions. You will need to add rolls of Armaflex ChezMoi 19 mm to the kit.
Armaflex ChezMoi or Armaflex AF: what’s the difference?
Armaflex ChezMoi is the successor to Armaflex AF for vehicle conversions: the same self-adhesive foam, with reaction to fire tested to the FMVSS automotive standard. Our article compares the two ranges point by point.
Is there a kit for the Renault Trafic in the same size?
Yes: the Renault Trafic has its own product listing, with the same quantities. See the Renault Trafic L1H1 kit.
Complete the insulation and finish of your Fiat Talento L1H1
This kit insulates the metalwork in one go. For more options using eco-friendly materials, explore our campervan insulation kits.
For the floor, add a layer of 4 mm cork underlay on a roll beneath your flooring: it reduces the feeling of a cold floor and reduces vibrations and road noise. Explore the full cork insulation range.
For the wall finish, start with a sample of stretch carpet lining: you can choose the colour (light grey, dark grey, anthracite, black or beige) in your van before ordering the van carpet lining.
-
Best selling