Fiat Talento L1H2 insulation: Armaflex ChezMoi 28 m² kit | Heode
Fiat Talento L1H2 insulation: Armaflex ChezMoi 28 m² kit | Heode
Ready-to-install insulation kit for the Fiat Talento L1H2: 28 m² of self-adhesive Armaflex ChezMoi, with everything you need for installation.
- 1 roll of Armaflex ChezMoi 10 mm (10 m²)
- 3 rolls of Armaflex ChezMoi 19 mm (18 m²)
- 3 rolls of Tape (15 m × 50 mm)
- 1 bottle of Cleaner (1 L)
- 1 pair of gloves and 1 utility knife included free
Integrated vapour barrier, no extra glue needed, 10-year manufacturer’s guarantee.
Quantities calculated for the Fiat Talento L1H2, excluding the cab partition.
Comfort in summer and winter in your Fiat Talento L1H2: 28 m² of Armaflex ChezMoi
Keep the warmth in during winter and limit heat build-up in summer in a Fiat Talento L1H2: that’s the job of Armaflex ChezMoi, which insulates the metal against both cold and heat. This kit brings together the quantities calculated for the Talento L1H2: 1 roll of 10 mm, 3 rolls of 19 mm, 3 rolls of Tape and 1 bottle of Cleaner, with a pair of gloves and a utility knife included free.
Armaflex ChezMoi is an elastomeric foam made in Europe using Armacell technology. Its self-adhesive side sticks directly to cleaned metal, with no extra glue needed. The closed cells also act as a vapour barrier (μ> 7,000): there’s no separate vapour control layer to install, and less condensation forms on the metal.
With a thermal conductivity of 0.035 W/(m·K) and an operating temperature range of −50 °C to +85 °C, it insulates against both cold and heat, whether you convert your Talento into a campervan or keep it as a work van. The A+ rating (ISO 16000, VOC-free) and Microban® antimicrobial treatment built into the material matter in a space where you sleep. Its reaction to fire meets the FMVSS automotive standard, and the manufacturer guarantees the material for 10 years.
The kit is straightforward to use: the 10 mm insulation is for the floor and uprights, the 19 mm for the walls and ceiling, Tape seals the joints, and Cleaner cleans the metal before installation.
Armaflex ChezMoi 19 mm: insulate the walls and ceiling
The 19 mm version is the standard thickness for large surfaces. It provides the most insulation where space allows: the Talento’s side walls, doors and ceiling. The kit contains 3 rolls, covering 18 m².
- Thickness: 19 mm
- Pack size: 6 m² roll (6 m × 1 m)
- Thermal conductivity: λ = 0.035 W/(m·K) at 0 °C
- Vapour barrier: integrated, μ> 7,000
- Operating temperature: −50 °C to +85 °C
- Reaction to fire: FMVSS automotive standard
- Air quality: A+ rating (ISO 16000), VOC-free
- Antimicrobial treatment: Microban® built into the material
- Guarantee: 10 years (manufacturer)

Armaflex ChezMoi 10 mm: insulate the floor and uprights
The 10 mm insulation fits where space is tight: the floor, deep reinforcements, wheel arches and uprights. It preserves interior height while insulating the metal. The kit contains 1 roll, covering 10 m².
- Thickness: 10 mm
- Pack size: 10 m² roll (10 m × 1 m)
- Thermal conductivity: λ = 0.035 W/(m·K) at 0 °C
- Vapour barrier: integrated, μ> 7,000
- Operating temperature: −50 °C to +85 °C
- Reaction to fire: FMVSS automotive standard
- Air quality: A+ rating (ISO 16000), VOC-free
- Antimicrobial treatment: Microban® built into the material
- Guarantee: 10 years (manufacturer)

Tape, Cleaner, gloves and utility knife: preparation, cutting and sealing joints
Tape seals the joints between sheets to limit thermal bridges, while Cleaner degreases the metal for good adhesion. The kit contains 3 rolls of Tape, giving you 45 m of tape, and 1 bottle of Cleaner. A pair of gloves and a utility knife are included free for handling and cutting the insulation.
- Tape: 15 m × 50 mm adhesive roll, 3 in the kit
- Cleaner: solvent-based Armaflex cleaner, 1 L bottle, applied with a cloth, 1 in the kit
- Gloves: 1 pair, included free with the kit
- Utility knife: 1, included free with the kit

Compatibility: Fiat Talento L1H2
The kit is sized for the load area of a 2016–2021 Fiat Talento L1H2 panel van: 2,537 mm long, 1,662 mm wide and 1,898 mm high, with 1,268 mm between the wheel arches. These dimensions are a guide: measure your vehicle before installation, especially if it has already been converted.
The Fiat Talento sold since 2024 is built on a different, larger platform: this kit is not suitable for it.
Please note: The partition separating the load area from the cab is not included in the kit’s coverage area.
The closed cells of Armaflex ChezMoi already act as a vapour barrier, so no additional vapour control layer is needed.
The Talento L1H2 shares its bodywork with the Renault Trafic from 2014 onwards: see the Renault Trafic L1H2 kit. It also fits Nissan NV300 and Opel Vivaro (2014-2019) vans of the same size, built on the same platform. Other Talento sizes: L1H1 and L2H1.
How do you install the Armaflex ChezMoi kit in a Fiat Talento L1H2?
Armaflex ChezMoi is self-adhesive: it installs without glue, using a few simple tools, and requires no special skills. Just follow the steps in order. Our blog article on installing Armaflex explains each step.
- Prepare the walls. Identify the areas to insulate. If you plan to fit wood panelling, install your fixing battens first.
- Clean the walls before installation. Dampen a clean cloth with Cleaner and wipe down all the metal: it must be clean and degreased for the adhesive to bond. Cleaner contains a solvent and gives off fumes: wear a mask and work outside if possible.
- Mark out. Mark the dimensions of each area on the non-adhesive side of the insulation, starting with the floor and uprights (10 mm), then the walls and ceiling (19 mm).
- Cut to size. Put on the gloves included free and cut the sheets to shape with the utility knife in the kit, or with an Armacell knife kit if you prefer. The foam cuts cleanly.
- Stick down. Peel away the protective film as you go, pressing the sheet onto the metal from the centre outwards to remove trapped air.
- Seal the joints. Apply Tape over every join between two sheets to limit thermal bridges.
Kit technical specifications
| Specification | Armaflex ChezMoi 10 mm | Armaflex ChezMoi 19 mm |
|---|---|---|
| Quantity in the kit | 1 roll | 3 rolls |
| Area covered by the kit | 10 m² | 18 m² |
| Pack size | 10 m × 1 m | 6 m × 1 m |
| Recommended areas | Floor, uprights | Walls, ceiling |
| Thermal conductivity | λ = 0.035 W/(m·K) at 0 °C | λ = 0.035 W/(m·K) at 0 °C |
| Water vapour resistance | μ> 7,000 | μ> 7,000 |
| Operating temperature | −50 °C to +85 °C | −50 °C to +85 °C |
| Reaction to fire | FMVSS automotive standard | FMVSS automotive standard |
| Air quality | A+ (ISO 16000), VOC-free | A+ (ISO 16000), VOC-free |
| Antimicrobial treatment | Integrated Microban® | Integrated Microban® |
| Guarantee | 10 years (manufacturer) | 10 years (manufacturer) |
The kit also contains 3 rolls of Tape (15 m × 50 mm), 1 bottle of solvent-based Cleaner (1 L), plus a pair of gloves and a utility knife included free.
Frequently asked questions about insulating a Fiat Talento L1H2
How can I tell whether my Talento is an L1H2?
The Talento panel van comes in two lengths (L1, L2) and two roof heights (H1, H2). Measure the usable floor length and interior height: approximately 2,537 mm for L1 and 2,937 mm for L2, and 1,387 mm for H1 and 1,898 mm for H2.
Do you need DIY experience to install this kit?
No. The insulation is self-adhesive and can be cut with the utility knife included free in the kit: clean, cut, stick, then seal the joints with Tape. Just follow the six steps in the installation section; the video shows you how.
Do you need to add glue?
No, the adhesive side of Armaflex ChezMoi sticks directly to the metal. Cleaner is only used to degrease it so the adhesive bonds properly.
Is this kit suitable for a Fiat Talento Combi?
It is designed for a Talento panel van being converted into a campervan. The Fiat Talento Combi is a glazed passenger version with an existing interior finish, so it does not have the same areas to insulate: measure the areas you need to cover before choosing how much Armaflex to buy.
Can you double the thickness for very cold conditions?
Yes, you can apply two layers to exposed areas if you drive in very cold conditions. You’ll need to add rolls of Armaflex ChezMoi 19 mm to the kit.
Armaflex ChezMoi or Armaflex AF: what’s the difference?
Armaflex ChezMoi is the successor to Armaflex AF for vehicle conversions: the same self-adhesive foam, with a reaction to fire that meets the FMVSS automotive standard. Our article compares the two ranges point by point.
Is there a kit for a Renault Trafic of the same size?
Yes: the Renault Trafic has its own product page, with the same quantities. See the Renault Trafic L1H2 kit.
Complete the insulation and interior finish of your Fiat Talento L1H2
This kit insulates the metal bodywork in one go. To take things further with eco-friendly materials, explore our campervan insulation kits.
For the floor, add a layer of 4 mm cork underlay on a roll beneath your floor covering: it reduces the feeling of a cold floor and cuts vibrations and road noise. Explore the full cork insulation range.
For the wall finish, start with a sample of stretch felt: you can choose the colour (light grey, dark grey, anthracite, black or beige) in your own van before ordering the van lining felt.
-
Best selling