Easy-fit Armaflex ChezMoi insulation kit for Fiat Talento L2H1
Easy-fit Armaflex ChezMoi insulation kit for Fiat Talento L2H1
Ready-to-fit insulation kit for the Fiat Talento L2H1: 22 m² of self-adhesive Armaflex ChezMoi, with everything you need to install it.
- 1 roll of Armaflex ChezMoi 10 mm (10 m²)
- 2 rolls of Armaflex ChezMoi 19 mm (12 m²)
- 2 rolls of Tape (15 m × 50 mm)
- 1 Cleaner (1 L bottle)
- 1 pair of gloves and 1 utility knife included free
Built-in vapour barrier, no extra glue needed, 10-year manufacturer’s guarantee.
Quantities calculated for the Fiat Talento L2H1, excluding the cab bulkhead.
22 m² of Armaflex ChezMoi with a 10-year guarantee to insulate your Fiat Talento L2H1
The manufacturer guarantees Armaflex ChezMoi for 10 years: a material you can rely on to insulate a Fiat Talento L2H1 for years to come. This kit brings together the quantities calculated for the Talento L2H1: 1 roll of 10 mm, 2 rolls of 19 mm, 2 rolls of Tape and 1 Cleaner, with a pair of gloves and a utility knife included free.
Armaflex ChezMoi is an elastomeric foam made in Europe using Armacell technology. Its self-adhesive side sticks directly to cleaned metal bodywork, with no extra glue needed. The closed cells also act as a vapour barrier (μ> 7 000): there is no separate vapour control layer to fit, and less condensation forms on the metal bodywork.
With a thermal conductivity of 0,035 W/(m·K) and a service temperature range of −50 °C to +85 °C, it insulates against both cold and heat, whether you convert your Talento into a campervan or keep it as a work van. The A+ rating (ISO 16000, VOC-free) and Microban® antimicrobial treatment built into the material matter in a space where you sleep. Its reaction to fire meets the FMVSS automotive standard, and the manufacturer guarantees the material for 10 years.
The kit is straightforward to use: the 10 mm goes on the floor and uprights, the 19 mm on the walls and ceiling, the Tape seals the joints, and the Cleaner cleans the metal bodywork before installation.
Armaflex ChezMoi 19 mm: insulating the walls and ceiling
The 19 mm is the standard thickness for large areas. It provides the most insulation where space allows: the Talento’s side walls, doors and ceiling. The kit contains 2 rolls, covering 12 m².
- Thickness: 19 mm
- Pack size: 6 m² roll (6 m × 1 m)
- Thermal conductivity: λ = 0,035 W/(m·K) at 0 °C
- Vapour barrier: built in, μ> 7 000
- Service temperature: −50 °C to +85 °C
- Reaction to fire: FMVSS automotive standard
- Air quality: A+ rating (ISO 16000), VOC-free
- Antimicrobial treatment: Microban® built into the material
- Guarantee: 10 years (manufacturer)

Armaflex ChezMoi 10 mm: insulating the floor and uprights
The 10 mm fits where space is tight: the floor, deep reinforcing ribs, wheel arches and uprights. It preserves interior height while insulating the metal bodywork. The kit contains 1 roll, covering 10 m².
- Thickness: 10 mm
- Pack size: 10 m² roll (10 m × 1 m)
- Thermal conductivity: λ = 0,035 W/(m·K) at 0 °C
- Vapour barrier: built in, μ> 7 000
- Service temperature: −50 °C to +85 °C
- Reaction to fire: FMVSS automotive standard
- Air quality: A+ rating (ISO 16000), VOC-free
- Antimicrobial treatment: Microban® built into the material
- Guarantee: 10 years (manufacturer)

Tape, Cleaner, gloves and utility knife: preparation, cutting and joints
The Tape seals the joints between sheets to limit thermal bridging, while the Cleaner degreases the metal bodywork for good adhesion. The kit contains 2 rolls of Tape, giving you 30 m of tape, and 1 Cleaner. A pair of gloves and a utility knife are included free for handling and cutting the insulation.
- Tape: 15 m × 50 mm roll, adhesive, 2 in the kit
- Cleaner: solvent-based Armaflex cleaner, 1 L bottle, applied with a cloth, 1 in the kit
- Gloves: 1 pair included free with the kit
- Utility knife: 1 included free with the kit

Compatibility: Fiat Talento L2H1
The kit is sized for the load area of a 2016–2021 Fiat Talento L2H1 panel van: 2 937 mm long, 1 662 mm wide and 1 387 mm high, with 1 268 mm between the wheel arches. These measurements are a guide: measure your vehicle before installation, especially if it has already been converted.
The Fiat Talento sold since 2024 is built on a different, larger platform: this kit does not fit it.
Please note: The bulkhead separating the load area from the cab is not included in the areas covered by the kit.
The closed cells of Armaflex ChezMoi already act as a vapour barrier, so no separate vapour control layer is needed.
The Talento L2H1 has shared its bodywork with the Renault Trafic since 2014: see the Renault Trafic L2H1 kit. It also fits same-size Nissan NV300 and Opel Vivaro models (2014-2019) built on the same platform. Other Talento sizes: L1H1 and L1H2.
How do I install the Armaflex ChezMoi kit in a Fiat Talento L2H1?
Armaflex ChezMoi is self-adhesive: it can be installed without glue, using a few simple tools, and requires no special skills. Just follow the steps in order. Our blog article on installing Armaflex explains each step in detail.
- Prepare the walls. Identify the areas to insulate. If you plan to add wood panelling, fit your fixing battens first.
- Clean the walls before installation. Dampen a clean cloth with Cleaner and wipe down all the metal bodywork: it must be clean and grease-free for the adhesive to bond. Cleaner contains a solvent and gives off fumes: wear a mask and work outside if possible.
- Mark out. Mark the dimensions of each area on the non-adhesive side of the insulation, starting with the floor and uprights (10 mm), then the walls and ceiling (19 mm).
- Cut. Put on the gloves included free and cut the sheets to shape with the utility knife in the kit, or with an Armacell knife set if you prefer. The foam cuts cleanly.
- Stick. Peel off the protective film as you go, pressing the sheet onto the metal bodywork from the centre towards the edges to push out any air.
- Seal the joints. Apply the Tape over every joint between two sheets to limit thermal bridging.
Kit specifications
| Specification | Armaflex ChezMoi 10 mm | Armaflex ChezMoi 19 mm |
|---|---|---|
| Quantity in the kit | 1 roll | 2 rolls |
| Area covered by the kit | 10 m² | 12 m² |
| Pack size | 10 m × 1 m | 6 m × 1 m |
| Recommended areas | Floor, uprights | Walls, ceiling |
| Thermal conductivity | λ = 0,035 W/(m·K) at 0 °C | λ = 0,035 W/(m·K) at 0 °C |
| Water vapour resistance | μ> 7 000 | μ> 7 000 |
| Service temperature | −50 °C to +85 °C | −50 °C to +85 °C |
| Reaction to fire | FMVSS automotive standard | FMVSS automotive standard |
| Air quality | A+ (ISO 16000), VOC-free | A+ (ISO 16000), VOC-free |
| Antimicrobial treatment | Built-in Microban® | Built-in Microban® |
| Guarantee | 10 years (manufacturer) | 10 years (manufacturer) |
The kit also contains 2 rolls of Tape (15 m × 50 mm), 1 solvent-based Cleaner (1 L bottle), plus 1 pair of gloves and 1 utility knife, included free.
Frequently asked questions about insulating a Fiat Talento L2H1
How can I tell if my Talento is an L2H1?
The Talento panel van comes in two lengths (L1, L2) and two roof heights (H1, H2). Measure the usable floor length and interior height: approximately 2 537 mm for L1 and 2 937 mm for L2, and 1 387 mm for H1 and 1 898 mm for H2.
Do I need DIY experience to fit this kit?
No. The insulation is self-adhesive and can be cut with the utility knife included free in the kit: clean, cut, stick, then seal the joints with Tape. The six steps in the installation section are all you need, and the video shows you how.
Do I need to add glue?
No, the self-adhesive side of Armaflex ChezMoi sticks directly to the metal bodywork. The Cleaner is only used to degrease it so the adhesive bonds well.
Is this kit suitable for a Fiat Talento Combi?
It is designed for a solid-sided Talento panel van being converted into a campervan. The Fiat Talento Combi, a glazed passenger version with an interior trim already fitted, does not have the same areas to insulate: measure the areas you need to cover before choosing how much Armaflex to buy.
Can I double up the insulation for very cold weather?
Yes, you can layer two sheets on exposed areas if you drive in very cold conditions. You will need to add rolls of Armaflex ChezMoi 19 mm to the kit.
Armaflex ChezMoi or Armaflex AF: what’s the difference?
Armaflex ChezMoi is the successor to Armaflex AF for vehicle conversions: the same self-adhesive foam, with a reaction-to-fire rating under the FMVSS automotive standard. Our article compares the two ranges point by point.
Is there a kit for the same-size Renault Trafic?
Yes: the Renault Trafic has its own product page, with the same quantities. See the Renault Trafic L2H1 kit.
Complete the insulation and finish of your Fiat Talento L2H1
This kit insulates the metal bodywork in one go. For a more comprehensive solution using eco-friendly materials, explore our campervan insulation kits.
For the floor, add a layer of 4 mm cork underlay on a roll beneath your floor covering: it reduces the feeling of a cold floor and cuts vibrations and road noise. Explore the full cork insulation range.
To finish the walls, start with a sample of stretch carpet lining: you can choose the colour (light grey, dark grey, anthracite, black or beige) in your van before ordering the van carpet lining.
-
Best selling