A tip, a question ? see our FAQ
Fibreglass panels for Volkswagen Transporter T5 rear swing doors
Pair of fibreglass plates to fit the rear swing doors(left + right) of Volkswagen Transporter T5 from 2003 to 2015. Completely opaque. Gloss finish on the outside to embellish your van.
Please note that one 457 x 382 mm left-hand sliding window and one 457 x 382 mm right-hand sliding window must be fitted, each on its respective panel, once they have been fitted.
Double fibreglass panels for Volkswagen Transporter T5 hinged doors
It's possible to fit your van with a pair of opaque fibreglass panels!
These black fibreglass panels are specifically designed to be fitted to the rear swing doors(left + right) of your T5. Completely opaque, they each have an opening for a 457 x 382 mm sliding window with flyscreen.
Compatibility between VW T5 fibreglass panel and universal sliding window
Fibreglass panel | Universal window compatibility (sold separately on our site) |
---|---|
Fibreglass panel left rear hinged door | Left sliding window 457 x 382 mm with flyscreen |
Fibreglass panel right rear hinged door | Right-hand sliding window 457 x 382 mm with insect screen |
How do you fit fibreglass panels to your van?
Step 1: Cut the sheet metal of your van to allow for the installation of your fibreglass panels on your hinged doors(left + right).
Step 2: ApplyFrameto Anti-Rust to the perimeter of the 2 openings for preventive treatment. Leave to dry, then install a 6 to 8 mm reinforced gasket for double sheet metal, essential for protecting the edge of the sheet, which can be sharp, and obtaining a professional finish.
Step 3: Cleanly apply a bead of mastic adhesive (represented by a solid yellow line in the image below) around the inside of each fibreglass panel. For information: 1 professional mastic-glue kit is normally enough to make 1 bead on each of the 2 panels.
Step 4: Place the fibreglass panels directly on the sheet metal of your van, each in its respective position. Leave to dry for 24 hours in a dry, sheltered place.
Step 5: Using a professional mastic-glue kit, install a 457 x 382 mm sliding window with mosquito netting in the opening in the centre of each fibreglass panel. You will need 2 professional glue kits, 1 for each window. Be careful not to apply sealant to the window rainwater outlets. Leave to dry for 24 hours in a sheltered, dry place.
Step 6 (optional): Once all the panels have been installed, create 2 wooden trims on which felt lining can be laid for an optimum interior finish!
Technical characteristics of the VW T5 swing door fibreglass panels
Left-hand rear hinged door panel
- Dimensions (hxw): 58 cm(highest) x 73 cm(widest).
- Thickness: approx. 0.5 cm.
- Weight: 1.7 kg.
Rear right hinged door panel
- Dimensions (hxw): 58 cm (highest) x 73 cm(widest).
- Thickness: approx. 0.5 cm.
- Weight: 1.7 kg.
Material: Fibreglass.
Colour: Black.
Inside of each panel: Fibreglass look(does not hurt or irritate).
Outside of each panel: Gloss finish.
Vehicle compatibility: Volkswagen Transporter T5 from 2003 to 2015.
Universal window compatibility(sold separately on our site): Left sliding window 457 x 382 mm with flyscreen; Right sliding window 457 x 382 mm with flyscreen.
Warning, not compatible with a vehicle fitted with windscreen wipers.
-
Best selling