Consider enhancing your LB102 base unit!

This 3/4 door front (P12) must be fitted together with the 1/4 door front (P5) to fully create the right sliding door required to close the LB102 base unit.

For it to be functional, note that you will need at least the following configuration: central base unit LB103 + base unit for right sliding door LB102.

Made from 15 mm HPL laminated birch plywood like the other surface elements of our LONGBOARD range. Not obtrusive but very practical, as it slides smoothly and will never be in your way. Indeed, when open, it sits in front of the central fixed door (P6) of the LB103 central base unit.

Moreover, it is resistant to impacts, stains and scratches thanks to its HPL laminate surface. Should your cupboard door (P12) receive splashes of wine, yoghurt, jam or other substances, don't worry, you'll be able to clean it easily.

A wood species combining strength and lightness for modular van furniture

Our team chose HPL laminated birch plywood for the base and wall surfaces of the LONGBOARD. This birch species has already proven itself for our flat-pack furniture. As evidenced by the perfect condition of our Fontana and Oceanside conversion kits varnished with Osmo TopOil after intensive use by our customers. This wood stands out for its robustness and aesthetics. Clad in HPL laminate, it guarantees good longevity.

Naturally lightweight, it's the ideal companion for a good van conversion whilst optimising its payload. With its base and wall finishing elements and regardless of your configuration, the LONGBOARD side unit suits all interior styles!

Compatibility and assembly of the 3/4 right sliding door front

To benefit from the specific features of the LB102 base unit for right sliding door, 2 configurations are available:

• central base unit LB103 + central fixed door front (P6) + base unit for right sliding door LB102 + 1/4 sliding door front (P5) + 3/4 right sliding door front (P12)
• base unit for left sliding door LB101 + 1/4 sliding door front (P5) + 3/4 left sliding door front (P4) + central base unit LB103 + central fixed door front (P6) + base unit for right sliding door LB102 + 1/4 sliding door front (P5) + 3/4 right sliding door front (P12)

Fitting the 1/4 sliding door front (P5) into the 3/4 right sliding door front (P12) is necessary to obtain a sliding door ensuring complete closure of the LB102 unit.

In short, this is the following configuration:

• 1/4 sliding door front (P5) + 3/4 right sliding door front (P12)

As you'll have understood, the door front (P12) cannot be installed alone and must necessarily be combined with the door front (P5).

Don't hesitate to install shelves (ET1) inside the LB102 base unit to create various storage spaces. They are compatible with all base units as well as the LONGBOARD wall unit.

Technical specifications of the 3/4 right sliding door front

• Dimensions (WxHxD): 433.5x487x15 mm.
• Material: HPL laminated birch plywood.
• Thickness: 15 mm.
• Compatible with base unit: LB102.
• Compatible with door front: (P5) 1/4.
• Please note, the 3/4 right sliding door front (P12) must always be assembled with the 1/4 sliding door front (P5). Without the front (P5), the front (P12) cannot be installed.
• Compatible with shelves: (ET1).
• Screws provided.
• Assembly instructions provided.