Fibreglass panel for left rear door of Volkswagen Transporter T6
Fibreglass panel for left rear door of Volkswagen Transporter T6
Fibreglass plate to be installed on the left rear door of Volkswagen Transporter T6 from 2015. Completely opaque. Glossy finish on the outer face to enhance your vehicle.
Please note, a 457 x 382 mm left sliding window with mosquito net must be installed on this panel once it is fixed.
Fibreglass panel for Volkswagen Transporter T6 left rear swing door
Equipping your vehicle with an opaque fibreglass panel is possible!
This black fibreglass plate is specifically designed to be fitted on the left rear swing door of your Volkswagen T6. Completely opaque, it features an opening allowing the installation of a left sliding window 457 x 382 mm with mosquito net (product sold separately on our website).
How to fit a fibreglass panel on your vehicle?
Step 1: Cut the metal sheet of your vehicle to allow the placement of your fibreglass left swing door panel.
Step 2: Apply Frameto Rust Prevention on the metal sheet perimeter of this opening as a preventive treatment. Leave to dry, then install a reinforced seal for 6 to 8 mm double sheet metal, essential for protecting the sheet metal edge which can be sharp and achieving a professional finish.
Step 3: Neatly apply a bead of adhesive sealant (shown as a continuous yellow line in the image just below) around the perimeter of the interior face of the fibreglass panel.

Step 4: Place the fibreglass panel directly on the metal sheet of your vehicle in the designated location. Leave to dry for 24 hours in a dry, sheltered place.
Step 5: Install the left sliding window 457 x 382 mm with mosquito net in the opening, in the centre of the fibreglass panel, using the professional adhesive sealant kit. Be careful not to apply sealant at the window's rainwater drainage outlets. Leave to dry for 24 hours in a sheltered, dry location.
Step 6 (optional): Once everything is fitted, create a wooden trim on which felt covering can be applied for an optimal interior finish!
Technical specifications of the VW T6 left swing door fibreglass panel
Dimensions (hxw): 58 cm (at highest point) x 73 cm (at widest point).
Thickness: approximately 0.5 cm.
Weight: 1.7 kg.
Material: Fibreglass.
Colour: Black.
Interior face of the panel: Fibreglass finish (does not injure or irritate).
Exterior face of the panel: Glossy finish.
Vehicle compatibility: Volkswagen Transporter T6 from 2015 onwards.
Compatible only with the left sliding window 457 x 382 mm with mosquito net.
Warning, not compatible with a vehicle fitted with windscreen wipers.
- Product type
- Fibreglass panel
-
Best selling