Double fibreglass panel for Volkswagen Transporter T6 swing doors

Fitting your van with a pair of opaque fibreglass panels is possible!

These black fibreglass panels are specifically designed to be installed on the rear swing doors (left + right) of your T6. Completely opaque, they each have an opening allowing the installation of a 457 x 382 mm sliding window with fly screen.

Fibreglass panel compatibility VW T6 and universal sliding window

How to install fibreglass panels on your van?

Step 1: Cut the metal sheet of your van to allow space for your fibreglass panels on your swing doors (left + right).

Step 2: Apply Frameto Anti-Rust to the metal edge around the 2 present openings for preventive treatment. Leave to dry, then install a reinforced seal for 6 to 8 mm double metal sheet, essential to protect the metal edge which can be sharp and achieve a professional finish.

Step 3: Carefully apply a bead of adhesive sealant (shown by a continuous yellow line in the image just below) around the perimeter of the interior face of each fibreglass panel. For information: 1 professional adhesive sealant kit is normally sufficient to apply 1 bead on each of the 2 panels.

Step 4: Position the fibreglass panels directly onto the metal sheet of your van, each in their respective location. Leave to dry for 24 hours in a dry and sheltered place.

Step 5: Install using a professional adhesive sealant kit, a 457 x 382 mm sliding window with fly screen in the opening, located in the centre of each fibreglass panel. Allow for 2 professional adhesive sealant kits, i.e. 1 for each window. Warning, do not apply sealant to the rainwater drainage outlets of the windows. Leave to dry for 24 hours in a sheltered and dry area.

Step 6 (optional): Once everything is installed, create 2 wooden trims on which felt covering can be applied to achieve an optimal interior finish!

Technical specifications of the fibreglass panels for VW T6 swing doors

Rear left swing door panel

• Dimensions (hxw): 58 cm (at highest point) x 73 cm (at widest point).
• Thickness: approximately 0.5 cm.
• Weight: 1.7 kg.

Rear right swing door panel

• Dimensions (hxw): 58 cm (at highest point) x 73 cm (at widest point).
• Thickness: approximately 0.5 cm.
• Weight: 1.7 kg.

Material: Fibreglass.
Colour: Black.
Interior face of each panel: Fibreglass finish (does not cut or irritate).
Exterior face of each panel: Gloss finish.
Vehicle compatibility: Volkswagen Transporter T6 from 2015 onwards.
Universal window compatibility (sold separately on our site): Left sliding window 457 x 382 mm with fly screen; Right sliding window 457 x 382 mm with fly screen.
Warning, not compatible with a vehicle fitted with rear wipers.