Heode engraved finishing plinth for LONGBOARD base unit!

To customise your LONGBOARD side unit, several surface elements such as worktops, finishing panels, doors, drawer fronts, or plinths have been designed by Heode. They serve as finishes and are all available individually on our website.

We present here a plinth for LONGBOARD base unit featuring an engraving of the Heode logo. Because we are proud to offer a LONGBOARD furniture range that is modular, customisable and ultra-functional to enable everyone to travel without limits!

This Heode engraved base unit plinth of chosen length (PLB420H; PLB840H or PLB1260H) has been manufactured in high-pressure laminate (HPL) birch plywood, 15 mm thick to add a touch of aesthetics and modernity to your furniture.

Thanks to the laminate coating, the plinths resist scratches and impacts. In case of accidental soiling, clean easily with a clean cloth.

Depending on the number of base cabinets, which plinth to choose?

It's simple, Heode guides you through the possible plinth configurations:

• For 1 single base cabinet, you need 2 engraved single base unit plinths (PLB420H)
• For 2 base cabinets side by side, you need 2 engraved duo base unit plinths (PLB840H)
• For 3 base cabinets side by side, you need 2 engraved trio base unit plinths (PLB1260H)

For example, for 3 base cabinets side by side, it is perfectly possible to choose 2 engraved single base unit plinths (PLB420H) + 2 engraved duo base unit plinths (PLB840H).

On a LONGBOARD base unit, there is always an engraved base unit plinth on top (under the worktop) and one on the bottom. In short, you always need 2 plinths per base cabinet.

Please pay attention, this is the exception to the rule: the base cabinet LB104 designed for housing a compressor refrigerator will always count as only one plinth.

Technical specifications of the LONGBOARD base unit plinth with Heode engraving

• Material: HPL laminated birch plywood.
• Thickness: 15 mm.
• Compatible with all base cabinets: LB100; LB101; LB102; LB103; LB104.
• Not compatible with upper cabinet: LB105.
• Please note, you always need 2 plinths per base cabinet. Except for base cabinet LB104 (specific to 12V fridge housing) which will always count as only one plinth under the worktop.
• Screws supplied.
• Assembly instructions supplied.