Armaflex ChezMoi easy insulation kit for Fiat Scudo L2H1

New

Armaflex ChezMoi easy insulation kit for Fiat Scudo L2H1

2.567_FS_L1H2
€378.77 Inc. VAT

Ready-to-install insulation kit for the Fiat Scudo L2H1: 22 m² of self-adhesive Armaflex ChezMoi, with everything you need to install it.

  • 1 roll of Armaflex ChezMoi 10 mm (10 m²)
  • 2 rolls of Armaflex ChezMoi 19 mm (12 m²)
  • 2 rolls of Tape (15 m × 50 mm)
  • 1 Cleaner (1 L bottle)
  • 1 pair of gloves and 1 utility knife included free

 

Built-in vapour barrier, no extra glue needed, 10-year manufacturer’s warranty.

Quantities calculated for the Fiat Scudo L2H1, excluding the cab partition.

Pack products My pack description
Pack contents

Everything needed to insulate a Fiat Scudo L2H1: 22 m² of Armaflex ChezMoi, Tape and Cleaner

One kit to insulate a Fiat Scudo L2H1 campervan: Armaflex ChezMoi, Tape for the joins and Cleaner to prepare the metal bodywork, all in quantities calculated for the Scudo L2H1. The kit contains 1 roll of 10 mm, 2 rolls of 19 mm, 2 rolls of Tape and 1 Cleaner, with a pair of gloves and a utility knife included free. Order everything in one go, with no extra products to add.

Armaflex ChezMoi is an elastomeric foam made in Europe using Armacell technology. Its self-adhesive side sticks directly to cleaned metal bodywork, with no extra glue needed. The closed cells also act as a vapour barrier (μ> 7 000): there is no separate vapour control layer to install, and less condensation forms on the metal bodywork.

With a thermal conductivity of 0,035 W/(m·K) and an operating range of −50 °C to +85 °C, it insulates against both cold and heat, whether you turn your Scudo into a campervan or keep it as a work van. The A+ rating (ISO 16000, VOC-free) and Microban® antimicrobial treatment built into the material matter in a space where you sleep. Its fire performance meets the FMVSS automotive standard, and the manufacturer guarantees the material for 10 years.

The kit is straightforward to use: the 10 mm goes on the floor and structural posts, the 19 mm on the walls and ceiling, the Tape seals the joins, and the Cleaner cleans the metal bodywork before installation.

 

Armaflex ChezMoi 19 mm: insulating the walls and ceiling

The 19 mm is the standard thickness for large areas. It provides more insulation where space allows: on the Scudo’s side walls, doors and ceiling. The kit contains 2 rolls, covering 12 m².

  • Thickness: 19 mm
  • Pack size: 6 m² roll (6 m × 1 m)
  • Thermal conductivity: λ = 0,035 W/(m·K) at 0 °C
  • Vapour barrier: built in, μ> 7 000
  • Operating temperature: −50 °C to +85 °C
  • Fire performance: FMVSS automotive standard
  • Air quality: A+ rating (ISO 16000), VOC-free
  • Antimicrobial treatment: Microban® built into the material
  • Warranty: 10 years (manufacturer)

 

Ceiling, walls and doors in 19 mm; floor and wheel arches in 10 mm: Armaflex ChezMoi kit diagram

 

Armaflex ChezMoi 10 mm: insulating the floor and structural posts

The 10 mm fits where space is tight: the floor, deep structural reinforcements, wheel arches and posts. It insulates the metal bodywork without taking up too much headroom. The kit contains 1 roll, covering 10 m².

  • Thickness: 10 mm
  • Pack size: 10 m² roll (10 m × 1 m)
  • Thermal conductivity: λ = 0,035 W/(m·K) at 0 °C
  • Vapour barrier: built in, μ> 7 000
  • Operating temperature: −50 °C to +85 °C
  • Fire performance: FMVSS automotive standard
  • Air quality: A+ rating (ISO 16000), VOC-free
  • Antimicrobial treatment: Microban® built into the material
  • Warranty: 10 years (manufacturer)

 

Cutting self-adhesive Armaflex insulation to size

 

Tape, Cleaner, gloves and utility knife: preparation, cutting and sealing joins

The Tape seals the joins between sheets to limit thermal bridging, while the Cleaner degreases the metal bodywork for good adhesion. The kit contains 2 rolls of Tape, giving you 30 m of tape, and 1 Cleaner. A pair of gloves and a utility knife are included free for handling and cutting the insulation.

  • Tape: 15 m × 50 mm roll, adhesive; 2 in the kit
  • Cleaner: solvent-based Armaflex cleaner, 1 L bottle, applied with a cloth; 1 in the kit
  • Gloves: 1 pair included free with the kit
  • Utility knife: 1 utility knife included free with the kit

 

Armaflex ChezMoi Tape applied over the join between two sheets

 

Compatibility: Fiat Scudo L2H1

The kit is sized for the load area of a Fiat Scudo L2H1 panel van from 2007 to 2016: 2 584 mm long, 1 600 mm wide and 1 449 mm high, with 1 245 mm between the wheel arches. These dimensions are indicative: measure your vehicle before installation, especially if it has already been converted.

It also fits 2007 to 2016 Citroën Jumpy and Peugeot Expert vans and 2013 to 2016 Toyota Proace vans in the L2H1 version, which share the Scudo’s bodywork.

The Fiat Scudo sold since 2022 shares its bodywork with the current Peugeot Expert and Citroën Jumpy: for this model, choose the Peugeot Expert Standard kit (Scudo Standard) or the Peugeot Expert Long kit (Scudo Maxi).

Please note: The partition separating the load area from the cab is not included in the areas covered by the kit.

As the closed cells of Armaflex ChezMoi already act as a vapour barrier, there is no need for a separate vapour control layer.

Other Scudo sizes: L1H1 and L2H2.

 

How do I install the Armaflex ChezMoi kit in a Fiat Scudo L2H1?

Armaflex ChezMoi is self-adhesive: it installs without glue, using a few simple tools, and requires no special skills. Just follow the steps in order. Our blog article on installing Armaflex explains each step in detail.

  1. Prepare the walls. Identify the areas to insulate. If you plan to add wood panelling, install the fixing battens first.
  2. Clean the walls before installation. Dampen a clean cloth with Cleaner and wipe down all the metal bodywork: it must be clean and free of grease for the adhesive to stick. The Cleaner contains a solvent and gives off fumes: wear a mask and work outdoors if possible.
  3. Mark out. Mark the dimensions of each area on the non-adhesive side of the insulation, starting with the floor and posts (10 mm), then the walls and ceiling (19 mm).
  4. Cut. Put on the gloves included free and cut the sheets to shape with the utility knife in the kit, or with an Armacell knife set if you prefer. The foam cuts cleanly.
  5. Stick in place. Peel back the protective film gradually, pressing the sheet onto the metal bodywork from the centre outwards to remove trapped air.
  6. Seal the joins. Apply Tape over each join between two sheets to limit thermal bridging.

 

 

Kit specifications

Specification Armaflex ChezMoi 10 mm Armaflex ChezMoi 19 mm
Quantity in the kit 1 roll 2 rolls
Area covered by the kit 10 m² 12 m²
Pack size 10 m × 1 m 6 m × 1 m
Recommended areas Floor, structural posts Walls, ceiling
Thermal conductivity λ = 0,035 W/(m·K) at 0 °C λ = 0,035 W/(m·K) at 0 °C
Water vapour resistance μ> 7 000 μ> 7 000
Operating temperature −50 °C to +85 °C −50 °C to +85 °C
Fire performance FMVSS automotive standard FMVSS automotive standard
Air quality A+ (ISO 16000), VOC-free A+ (ISO 16000), VOC-free
Antimicrobial treatment Built-in Microban® Built-in Microban®
Warranty 10 years (manufacturer) 10 years (manufacturer)

 

The kit also contains 2 rolls of Tape (15 m × 50 mm), 1 solvent-based Cleaner (1 L bottle), plus 1 pair of gloves and 1 utility knife included free.

 

Frequently asked questions about insulating a Fiat Scudo L2H1

How can I tell if my Scudo is an L2H1?

The 2007 to 2016 Scudo panel van comes with a short (L1) or long (L2) wheelbase and a standard (H1) or high (H2) roof. Measure the usable floor length and interior height: approximately 2 254 mm for L1 and 2 584 mm for L2, 1 449 mm for H1 and 1 750 mm for H2.

 

Do I need DIY skills to install this kit?

No. The insulation is self-adhesive and can be cut with the utility knife included free in the kit: clean, cut, stick, then seal the joins with Tape. The six steps in the installation section are all you need, and the video shows you what to do.

 

Do I need to add glue?

No, the self-adhesive side of Armaflex ChezMoi sticks directly to the metal bodywork. The Cleaner is only used to degrease it so that the adhesive bonds properly.

 

Does this kit fit a Fiat Scudo Combi?

It is designed for a Scudo panel van being converted into a campervan. The Fiat Scudo Combi, a glazed passenger version with an existing interior lining, does not have the same areas to insulate: measure the areas you need to cover before choosing your quantities of Armaflex.

 

Can I double the thickness for very cold weather?

Yes, you can apply two layers to exposed areas if you drive in very cold conditions. You will need to add rolls of Armaflex ChezMoi 19 mm to the kit.

 

Armaflex ChezMoi or Armaflex AF: what’s the difference?

Armaflex ChezMoi is the successor to Armaflex AF for vehicle conversions: the same self-adhesive foam, with fire performance in accordance with the FMVSS automotive standard. Our article compares the two ranges point by point.

 

Does this kit fit the Fiat Scudo sold since 2022?

No. This kit is sized for the 2007 to 2016 Scudo. The current Scudo shares its bodywork with the Peugeot Expert: choose the Peugeot Expert Standard kit for a Scudo Standard, or the Peugeot Expert Long kit for a Scudo Maxi.

 

Complete the insulation and interior finish of your Fiat Scudo L2H1

This kit insulates the metal bodywork in one go. To go further with environmentally responsible materials, explore our campervan insulation kits.

For the floor, add a 4 mm cork underlay roll beneath your floor covering: it reduces the feeling of a cold floor and reduces vibrations and road noise. Explore the full cork insulation range.

For the wall finish, start with a stretch felt sample: you can choose the colour (light grey, dark grey, anthracite, black or beige) in your van before ordering the campervan felt.