Easy-fit Armaflex ChezMoi insulation kit for Fiat Scudo L2H2
Easy-fit Armaflex ChezMoi insulation kit for Fiat Scudo L2H2
Ready-to-fit insulation kit for the Fiat Scudo L2H2: 22 m² of self-adhesive Armaflex ChezMoi, with everything you need to fit it.
- 1 roll of Armaflex ChezMoi 10 mm (10 m²)
- 2 rolls of Armaflex ChezMoi 19 mm (12 m²)
- 2 rolls of Tape (15 m × 50 mm)
- 1 Cleaner (1 L bottle)
- 1 pair of gloves and 1 utility knife included free
Integrated vapour barrier, no extra glue needed, 10-year manufacturer’s warranty.
Quantities calculated for the Fiat Scudo L2H2, excluding the cab partition.
22 m² of Armaflex ChezMoi calculated to insulate your Fiat Scudo L2H2
This kit brings together all the Armaflex ChezMoi you need to insulate a Fiat Scudo L2H2 as a campervan: 1 roll of 10 mm, 2 rolls of 19 mm, 2 rolls of Tape and 1 Cleaner, with a pair of gloves and a utility knife included free. The quantities are calculated for the Scudo L2H2: order everything at once, with no need to estimate the area or add another product.
Armaflex ChezMoi is an elastomeric foam made in Europe using Armacell technology. Its self-adhesive side sticks directly to cleaned metal panels, with no extra glue needed. The closed cells also act as a vapour barrier (μ> 7 000): there’s no separate vapour control layer to fit, and less condensation on the metal panels.
With a thermal conductivity of 0,035 W/(m·K) and a service temperature range of −50 °C to +85 °C, it insulates against both cold and heat, whether your Scudo becomes a campervan or remains a work van. The A+ rating (ISO 16000, VOC-free) and Microban® antimicrobial treatment integrated into the material matter in a space where you sleep. Its fire performance meets the FMVSS automotive standard, and the manufacturer guarantees the material for 10 years.
The kit is straightforward to use: 10 mm for the floor and uprights, 19 mm for the walls and ceiling, Tape to seal the joins and Cleaner to clean the metal panels before fitting.
Armaflex ChezMoi 19 mm: insulate the walls and ceiling
The 19 mm is the standard thickness for large areas. It provides the most insulation where space allows: the Scudo’s side walls, doors and ceiling. The kit contains 2 rolls, covering 12 m².
- Thickness: 19 mm
- Pack size: 6 m² roll (6 m × 1 m)
- Thermal conductivity: λ = 0,035 W/(m·K) at 0 °C
- Vapour barrier: integrated, μ> 7 000
- Service temperature: −50 °C to +85 °C
- Fire performance: FMVSS automotive standard
- Air quality: A+ rating (ISO 16000), VOC-free
- Antimicrobial treatment: Microban® integrated into the material
- Warranty: 10 years (manufacturer)

Armaflex ChezMoi 10 mm: insulate the floor and uprights
The 10 mm fits where space is tight: the floor, deep reinforcements, wheel arches and uprights. It insulates the metal panels while preserving headroom. The kit contains 1 roll, covering 10 m².
- Thickness: 10 mm
- Pack size: 10 m² roll (10 m × 1 m)
- Thermal conductivity: λ = 0,035 W/(m·K) at 0 °C
- Vapour barrier: integrated, μ> 7 000
- Service temperature: −50 °C to +85 °C
- Fire performance: FMVSS automotive standard
- Air quality: A+ rating (ISO 16000), VOC-free
- Antimicrobial treatment: Microban® integrated into the material
- Warranty: 10 years (manufacturer)

Tape, Cleaner, gloves and utility knife: preparation, cutting and joins
Tape seals the joins between sheets to limit thermal bridges, while Cleaner degreases the metal panels for a good bond. The kit contains 2 rolls of Tape, providing 30 m of tape, and 1 Cleaner. A pair of gloves and a utility knife are included free for handling and cutting the insulation.
- Tape: 15 m × 50 mm roll of adhesive tape, 2 in the kit
- Cleaner: solvent-based Armaflex cleaner, 1 L bottle, applied with a cloth, 1 in the kit
- Gloves: 1 pair, included free with the kit
- Utility knife: 1, included free with the kit

Compatibility: Fiat Scudo L2H2
The kit is sized for the load area of a Fiat Scudo L2H2 panel van from 2007 to 2016: 2 584 mm long, 1 600 mm wide and 1 750 mm high, with 1 245 mm between the wheel arches. These dimensions are indicative: measure your vehicle before fitting, especially if it has already been converted.
It is also suitable for Citroën Jumpy and Peugeot Expert vans from 2007 to 2016 and the Toyota Proace from 2013 to 2016 in L2H2 versions, which share the Scudo’s bodywork.
The Fiat Scudo sold since 2022 shares its bodywork with the current Peugeot Expert and Citroën Jumpy: for this model, choose the Peugeot Expert Standard kit (Scudo Standard) or the Peugeot Expert Long kit (Scudo Maxi).
Please note: The partition separating the load area from the cab is not included in the kit’s coverage.
As the closed cells of Armaflex ChezMoi already act as a vapour barrier, there’s no need for a separate vapour control layer.
Other Scudo sizes: L1H1 and L2H1.
How do I install the Armaflex ChezMoi kit in a Fiat Scudo L2H2?
Armaflex ChezMoi is self-adhesive: it can be fitted without glue, using just a few simple tools, and requires no special skills. Simply follow the steps in order. Our blog article on fitting Armaflex explains each step in detail.
- Prepare the panels. Identify the areas to insulate. If you plan to fit wood panelling, install the fixing battens first.
- Clean the panels before fitting. Soak a clean cloth with Cleaner and wipe down all the metal panels: they must be clean and degreased for the adhesive to stick. Cleaner contains a solvent and gives off fumes: wear a mask and work outside if possible.
- Mark out. Mark the dimensions of each area on the non-adhesive side of the insulation, starting with the floor and uprights (10 mm), then the walls and ceiling (19 mm).
- Cut to size. Put on the gloves included free and cut the sheets to shape with the utility knife in the kit, or with an Armacell knife set if you prefer. The foam cuts cleanly.
- Stick in place. Peel off the protective film as you go, pressing the sheet onto the metal panel from the centre outwards to push out the air.
- Seal the joins. Apply Tape to every join between two sheets to limit thermal bridges.
Kit technical specifications
| Specification | Armaflex ChezMoi 10 mm | Armaflex ChezMoi 19 mm |
|---|---|---|
| Quantity in the kit | 1 roll | 2 rolls |
| Area covered by the kit | 10 m² | 12 m² |
| Pack size | 10 m × 1 m | 6 m × 1 m |
| Recommended areas | Floor, uprights | Walls, ceiling |
| Thermal conductivity | λ = 0,035 W/(m·K) at 0 °C | λ = 0,035 W/(m·K) at 0 °C |
| Water vapour resistance | μ> 7 000 | μ> 7 000 |
| Service temperature | −50 °C to +85 °C | −50 °C to +85 °C |
| Fire performance | FMVSS automotive standard | FMVSS automotive standard |
| Air quality | A+ (ISO 16000), VOC-free | A+ (ISO 16000), VOC-free |
| Antimicrobial treatment | Integrated Microban® | Integrated Microban® |
| Warranty | 10 years (manufacturer) | 10 years (manufacturer) |
The kit also contains 2 rolls of Tape (15 m × 50 mm), 1 bottle of solvent-based Cleaner (1 L), plus 1 pair of gloves and 1 utility knife included free.
Frequently asked questions about insulating a Fiat Scudo L2H2
How can I tell if my Scudo is an L2H2?
The 2007 to 2016 Scudo panel van comes with a short (L1) or long (L2) wheelbase, and a standard (H1) or high (H2) roof. Measure the usable floor length and interior height: approximately 2 254 mm for L1 and 2 584 mm for L2, and 1 449 mm for H1 and 1 750 mm for H2.
Do I need DIY experience to fit this kit?
No. The insulation is self-adhesive and can be cut with the utility knife included free in the kit: clean, cut, stick, then seal the joins with Tape. The six steps in the installation section are all you need, and the video shows you how.
Do I need to add glue?
No, the self-adhesive side of Armaflex ChezMoi sticks directly to the metal panels. Cleaner is only used to degrease them so the adhesive bonds properly.
Is this kit suitable for a Fiat Scudo Combi?
It is designed for a Scudo panel van being converted into a campervan. The Fiat Scudo Combi, a glazed passenger version with an existing interior lining, does not have the same areas to insulate: measure the areas you need to cover before choosing how much Armaflex to buy.
Can I double the thickness for very cold conditions?
Yes, you can layer two sheets in exposed areas if you travel in very cold conditions. You’ll need to add rolls of Armaflex ChezMoi 19 mm to the kit.
Armaflex ChezMoi or Armaflex AF: what’s the difference?
Armaflex ChezMoi is the successor to Armaflex AF for vehicle conversions: the same self-adhesive foam, with fire performance in accordance with the FMVSS automotive standard. Our article compares the two ranges point by point.
Is this kit suitable for the Fiat Scudo sold since 2022?
No. This kit is calculated for the 2007 to 2016 Scudo. The current Scudo shares its bodywork with the Peugeot Expert: choose the Peugeot Expert Standard kit for a Scudo Standard, or the Peugeot Expert Long kit for a Scudo Maxi.
Complete the insulation and interior finish of your Fiat Scudo L2H2
This kit insulates the metal panels in one go. To go further with eco-responsible materials, explore our campervan insulation kits.
For the floor, add a layer of 4 mm cork underlay on a roll beneath your floor covering: it reduces the feeling of a cold floor and reduces vibrations and road noise. Explore our full cork insulation range.
For the wall finish, start with a sample of stretch lining fabric: you can choose the colour (light grey, dark grey, anthracite, black or beige) in your van before ordering the van lining fabric.
-
Best selling