Easy-fit Armaflex ChezMoi insulation kit for Ford Transit Custom L1H1

New

Easy-fit Armaflex ChezMoi insulation kit for Ford Transit Custom L1H1

2.567_FTC_L1H1
€378.77 Inc. VAT

Ready-to-fit insulation kit for the Ford Transit Custom L1H1: 22 m² of self-adhesive Armaflex ChezMoi, with everything you need to fit it.

  • 1 roll of Armaflex ChezMoi 10 mm (10 m²)
  • 2 rolls of Armaflex ChezMoi 19 mm (12 m²)
  • 2 rolls of Tape (15 m × 50 mm)
  • 1 bottle of Cleaner (1 L)
  • 1 pair of gloves and 1 utility knife included free

 

Built-in vapour barrier, no extra glue needed, 10-year manufacturer’s guarantee.

Quantities calculated for the Ford Transit Custom L1H1, excluding the cab partition.

Pack products My pack description
Pack contents

Insulate your Ford Transit Custom L1H1 without glue: 22 m² of self-adhesive Armaflex ChezMoi

For converting a Ford Transit Custom L1H1 into a campervan, this kit brings together self-adhesive Armaflex ChezMoi and everything needed to fit it: 1 roll of 10 mm, 2 rolls of 19 mm, 2 rolls of Tape and 1 bottle of Cleaner, plus a free pair of gloves and utility knife. No glue to buy or spread: the self-adhesive backing sticks directly to clean, degreased vehicle metal. Quantities are calculated for the Transit Custom L1H1, excluding the cab partition.

Armaflex ChezMoi is an elastomeric foam made in Europe using Armacell technology. Its self-adhesive backing sticks directly to clean, degreased vehicle metal, with no extra glue needed. The closed cells also act as a vapour barrier (μ> 7,000): there’s no need to fit a separate vapour control layer, and there’s less condensation on the metal.

With a thermal conductivity of 0.035 W/(m·K) and an operating range of −50 °C to +85 °C, it insulates against both cold and heat, whether you turn your Transit Custom into a campervan or keep it as a work van. The A+ air quality rating (ISO 16000, VOC-free) and Microban® antimicrobial treatment built into the material matter in a space where you sleep. Its fire performance meets the FMVSS automotive standard, and the manufacturer guarantees the material for 10 years.

Using the kit is straightforward: fit the 10 mm insulation on the floor and uprights, the 19 mm insulation on the walls and ceiling, the Tape over the joints and the Cleaner to clean the vehicle metal before installation.

 

Armaflex ChezMoi 19 mm: insulate the walls and ceiling

The 19 mm insulation is the standard thickness for large surfaces. It provides the most insulation where space allows: on the Transit Custom’s side walls, doors and ceiling. The kit contains 2 rolls, covering 12 m².

  • Thickness: 19 mm
  • Packaging: 6 m² roll (6 m × 1 m)
  • Thermal conductivity: λ = 0.035 W/(m·K) at 0 °C
  • Vapour barrier: built in, μ> 7,000
  • Operating temperature: −50 °C to +85 °C
  • Fire performance: FMVSS automotive standard
  • Air quality: A+ rating (ISO 16000), VOC-free
  • Antimicrobial treatment: Microban® built into the material
  • Guarantee: 10 years (manufacturer)

 

Cross-section of an insulated van: 19 mm on the ceiling, walls and doors, 10 mm on the floor

 

Armaflex ChezMoi 10 mm: insulate the floor and uprights

The 10 mm insulation fits where space is tight: the floor, deep structural ribs, wheel arches and uprights. It preserves headroom while insulating the vehicle metal. The kit contains 1 roll, covering 10 m².

  • Thickness: 10 mm
  • Packaging: 10 m² roll (10 m × 1 m)
  • Thermal conductivity: λ = 0.035 W/(m·K) at 0 °C
  • Vapour barrier: built in, μ> 7,000
  • Operating temperature: −50 °C to +85 °C
  • Fire performance: FMVSS automotive standard
  • Air quality: A+ rating (ISO 16000), VOC-free
  • Antimicrobial treatment: Microban® built into the material
  • Guarantee: 10 years (manufacturer)

 

Cutting a length of Armaflex ChezMoi with a utility knife

 

Tape, Cleaner, gloves and utility knife: preparation, cutting and joints

The Tape seals the joints between sheets to limit thermal bridging, while the Cleaner degreases the vehicle metal for good adhesion. The kit contains 2 rolls of Tape, giving you 30 m of tape, and 1 bottle of Cleaner. A pair of gloves and a utility knife are included free for handling and cutting the insulation.

  • Tape: adhesive roll, 15 m × 50 mm, 2 in the kit
  • Cleaner: solvent-based Armaflex cleaner, 1 L bottle, applied with a cloth, 1 bottle in the kit
  • Gloves: 1 pair, included free with the kit
  • Utility knife: 1 utility knife, included free with the kit

 

Armaflex ChezMoi Tape over the joint between two insulation sheets

 

Compatible with: Ford Transit Custom L1H1

The kit is sized for the load area of a Ford Transit Custom L1H1 panel van from 2012 to 2023: 2,554 mm long, 1,775 mm wide and 1,406 mm high, with 1,351 mm between the wheel arches. These measurements are indicative: measure your vehicle before installation, especially if it has already been converted.

It also suits the Transit Custom sold since 2024 in L1H1 size: its load area is longer (2,602 mm) but lower (1,267 mm), so it needs less insulation than the previous generation.

Please note: The partition between the load area and cab is not included in the areas covered by the kit.

As the closed cells of Armaflex ChezMoi already act as a vapour barrier, there’s no need for a separate vapour control layer.

Other Transit Custom sizes: L1H2, L2H1 and L2H2.

 

How do you install the Armaflex ChezMoi kit in a Ford Transit Custom L1H1?

Armaflex ChezMoi is self-adhesive: it can be fitted without glue, using a few simple tools, and requires no special skills. Just follow the steps in order. Our blog article on fitting Armaflex explains each step in detail.

  1. Prepare the surfaces. Identify the areas to insulate. If you’re planning to fit wooden lining, install the fixing battens first.
  2. Clean the surfaces before installation. Soak a clean cloth with Cleaner and wipe down all the vehicle metal: it must be clean and free of grease for the adhesive to stick. Cleaner contains a solvent and gives off fumes: wear a mask and work outdoors if possible.
  3. Mark out the sheets. Transfer the dimensions of each area onto the non-adhesive side of the insulation, starting with the floor and uprights (10 mm), then the walls and ceiling (19 mm).
  4. Cut the insulation. Put on the free gloves and cut the sheets to shape with the utility knife in the kit, or with an Armacell knife kit if you prefer. The foam cuts cleanly.
  5. Stick it down. Peel back the protective film as you go, pressing the sheet onto the vehicle metal from the centre towards the edges to push out the air.
  6. Seal the joints. Apply Tape over each joint between two sheets to limit thermal bridging.

 

 

Kit technical specifications

Specification Armaflex ChezMoi 10 mm Armaflex ChezMoi 19 mm
Quantity in the kit 1 roll 2 rolls
Area covered by the kit 10 m² 12 m²
Packaging 10 m × 1 m 6 m × 1 m
Recommended areas Floor, uprights Walls, ceiling
Thermal conductivity λ = 0.035 W/(m·K) at 0 °C λ = 0.035 W/(m·K) at 0 °C
Water vapour resistance μ> 7,000 μ> 7,000
Operating temperature −50 °C to +85 °C −50 °C to +85 °C
Fire performance FMVSS automotive standard FMVSS automotive standard
Air quality A+ (ISO 16000), VOC-free A+ (ISO 16000), VOC-free
Antimicrobial treatment Built-in Microban® Built-in Microban®
Guarantee 10 years (manufacturer) 10 years (manufacturer)

 

The kit also contains 2 rolls of Tape (15 m × 50 mm), 1 solvent-based Cleaner (1 L bottle), plus a free pair of gloves and utility knife.

 

Frequently asked questions about insulating a Ford Transit Custom L1H1

How can I tell if my Transit Custom is an L1H1?

The Transit Custom panel van comes with a short (L1) or long (L2) wheelbase, and a standard (H1) or high (H2) roof. Measure the usable load-floor length and interior height: approximately 2,554 mm for L1 and 2,921 mm for L2, and 1,406 mm for H1 and 1,778 mm for H2.

 

Do I need DIY experience to fit this kit?

No. The insulation is self-adhesive and can be cut with the utility knife included free in the kit: clean, cut, stick, then seal the joints with Tape. The six steps in the installation section are all you need, and the video shows you how.

 

Do I need to add glue?

No, the self-adhesive backing of Armaflex ChezMoi sticks directly to the vehicle metal. Cleaner is only used to degrease it so the adhesive bonds properly.

 

Is this kit suitable for a Ford Tourneo Custom?

It is designed for a Transit Custom panel van being converted into a campervan. The Ford Tourneo Custom, a glazed passenger version with its interior trim already fitted, does not have the same surfaces to insulate: measure the areas you need to cover before choosing how much Armaflex you need.

 

Can I double up the insulation for very cold weather?

Yes, you can layer two sheets in exposed areas if you drive in very cold conditions. You’ll need to add rolls of Armaflex ChezMoi 19 mm to the kit.

 

Armaflex ChezMoi or Armaflex AF: what’s the difference?

Armaflex ChezMoi is the successor to Armaflex AF for vehicle conversions: the same self-adhesive foam, with fire performance to the FMVSS automotive standard. Our article compares the two ranges point by point.

 

Is this kit suitable for the Transit Custom sold since 2024?

Yes. The current Transit Custom is longer but lower: the L1H1 kit covers its surfaces, excluding the cab partition.

 

Complete the insulation and finish of your Ford Transit Custom L1H1

This kit insulates the vehicle metal in one go. If you’d like to go further with eco-responsible materials, explore our campervan insulation kits.

For the floor, add a layer of 4 mm cork on a roll beneath your floor covering: it reduces the feeling of a cold floor and reduces vibrations and road noise. Explore the full cork insulation range.

To cover the insulation, Heode offers wooden lining for the 2012 to 2023 Transit Custom: side walls, ceiling and non-slip floor. Find them in the 2012 to 2023 Ford Custom category, and lining for the current generation in the Ford Custom since 2024 category.

For the wall finish, start with a stretch felt sample: you can choose the colour (light grey, dark grey, anthracite, black or beige) in your own van before ordering the van lining felt.