Easy insulation kit Armaflex ChezMoi Ford Transit Custom L2H1
Easy insulation kit Armaflex ChezMoi Ford Transit Custom L2H1
Ready-to-install insulation kit for Ford Transit Custom L2H1: 28 m² of self-adhesive Armaflex ChezMoi, with everything you need for installation.
- 1 roll of Armaflex ChezMoi 10 mm (10 m²)
- 3 rolls of Armaflex ChezMoi 19 mm (18 m²)
- 3 rolls of Tape (15 m × 50 mm)
- 1 Cleaner (1 L bottle)
- 1 pair of gloves and 1 utility knife included free
Integrated vapour barrier, no extra glue needed, 10-year manufacturer’s guarantee.
Quantities calculated for the Ford Transit Custom L2H1, excluding the cab partition.
Everything you need to insulate a Ford Transit Custom L2H1: 28 m² of Armaflex ChezMoi, Tape and Cleaner
One kit to insulate a Ford Transit Custom L2H1 for a campervan conversion: Armaflex ChezMoi, Tape for the joints and Cleaner to prepare the metal are all included in quantities calculated for the Transit Custom L2H1. The kit contains 1 roll of 10 mm insulation, 3 rolls of 19 mm insulation, 3 rolls of Tape and 1 Cleaner, with a pair of gloves and a utility knife included free. Order everything in one go, with no additional items to find.
Armaflex ChezMoi is an elastomeric foam made in Europe using Armacell technology. Its self-adhesive side sticks directly to cleaned metal, with no extra glue needed. Its closed cells also act as a vapour barrier (μ> 7,000): there’s no separate vapour control layer to install, and less condensation forms on the metal.
With a thermal conductivity of 0.035 W/(m·K) and an operating temperature range of −50 °C to +85 °C, it insulates against both cold and heat, whether you convert your Transit Custom into a campervan or keep it as a work van. Its A+ rating (ISO 16000, VOC-free) and Microban® antimicrobial treatment integrated into the material matter in a space where you sleep. Its fire performance meets the FMVSS automotive standard, and the manufacturer guarantees the material for 10 years.
The kit is straightforward to use: 10 mm insulation for the floor and pillars, 19 mm for the walls and ceiling, Tape to seal the joints and Cleaner to clean the metal before installation.
Armaflex ChezMoi 19 mm: insulate the walls and ceiling
The 19 mm insulation is the standard thickness for large surfaces. It provides the most insulation where space allows: the Transit Custom’s side walls, doors and ceiling. The kit contains 3 rolls, covering 18 m².
- Thickness: 19 mm
- Roll size: 6 m² (6 m × 1 m)
- Thermal conductivity: λ = 0.035 W/(m·K) at 0 °C
- Vapour barrier: integrated, μ> 7,000
- Operating temperature: −50 °C to +85 °C
- Fire performance: FMVSS automotive standard
- Air quality: A+ rating (ISO 16000), VOC-free
- Antimicrobial treatment: Microban® integrated into the material
- Guarantee: 10 years (manufacturer)

Armaflex ChezMoi 10 mm: insulate the floor and pillars
The 10 mm insulation fits where space is tight: the floor, deep structural reinforcements, wheel arches and pillars. It helps preserve interior height while insulating the metal. The kit contains 1 roll, covering 10 m².
- Thickness: 10 mm
- Roll size: 10 m² (10 m × 1 m)
- Thermal conductivity: λ = 0.035 W/(m·K) at 0 °C
- Vapour barrier: integrated, μ> 7,000
- Operating temperature: −50 °C to +85 °C
- Fire performance: FMVSS automotive standard
- Air quality: A+ rating (ISO 16000), VOC-free
- Antimicrobial treatment: Microban® integrated into the material
- Guarantee: 10 years (manufacturer)

Tape, Cleaner, gloves and utility knife: preparation, cutting and joints
The Tape seals the joints between sheets to limit thermal bridging, while the Cleaner degreases the metal for good adhesion. The kit contains 3 rolls of Tape, providing 45 m of tape, and 1 Cleaner. A pair of gloves and a utility knife are included free for handling and cutting the insulation.
- Tape: 15 m × 50 mm adhesive roll, 3 included in the kit
- Cleaner: solvent-based Armaflex cleaner, 1 L bottle, apply with a cloth, 1 included in the kit
- Gloves: 1 pair, included free with the kit
- Utility knife: 1, included free with the kit

Compatibility: Ford Transit Custom L2H1
The kit is sized for the load area of a Ford Transit Custom L2H1 panel van from 2012 to 2023: 2,921 mm long, 1,775 mm wide and 1,406 mm high, with 1,351 mm between the wheel arches. These measurements are indicative: measure your vehicle before installation, especially if it has already been converted.
It is also suitable for the Transit Custom sold since 2024 in L2H1: its load area is longer (3,002 mm) but lower (1,267 mm), so it requires less insulation than the previous generation.
Please note: The partition separating the cab is not included in the areas covered by the kit.
Because the closed cells of Armaflex ChezMoi already act as a vapour barrier, no separate vapour control layer is needed.
Other Transit Custom sizes: L1H1, L1H2 and L2H2.
How do I install the Armaflex ChezMoi kit in a Ford Transit Custom L2H1?
Armaflex ChezMoi is self-adhesive: it installs without glue, using a few simple tools, and requires no special skills. Just follow the steps in order. Our blog article on installing Armaflex explains each step in detail.
- Prepare the surfaces. Identify the areas to insulate. If you plan to install wood panelling, fit your fixing battens first.
- Clean the surfaces before installation. Dampen a clean cloth with Cleaner and wipe down all the metal: it must be clean and degreased for the adhesive to bond. Cleaner contains a solvent and gives off fumes: wear a mask and work outside if possible.
- Mark out. Transfer the dimensions of each area onto the non-adhesive side of the insulation, starting with the floor and pillars (10 mm), then the walls and ceiling (19 mm).
- Cut. Put on the gloves included free and cut the sheets to shape with the utility knife in the kit, or with an Armacell knife set if you prefer. The foam cuts cleanly.
- Stick down. Peel away the backing film as you go, pressing the sheet onto the metal from the centre outwards to remove trapped air.
- Seal the joints. Apply the Tape over each joint between two sheets to limit thermal bridging.
Kit specifications
| Specification | Armaflex ChezMoi 10 mm | Armaflex ChezMoi 19 mm |
|---|---|---|
| Quantity in the kit | 1 roll | 3 rolls |
| Area covered by the kit | 10 m² | 18 m² |
| Roll size | 10 m × 1 m | 6 m × 1 m |
| Recommended areas | Floor, pillars | Walls, ceiling |
| Thermal conductivity | λ = 0.035 W/(m·K) at 0 °C | λ = 0.035 W/(m·K) at 0 °C |
| Water vapour resistance | μ> 7,000 | μ> 7,000 |
| Operating temperature | −50 °C to +85 °C | −50 °C to +85 °C |
| Fire performance | FMVSS automotive standard | FMVSS automotive standard |
| Air quality | A+ (ISO 16000), VOC-free | A+ (ISO 16000), VOC-free |
| Antimicrobial treatment | Integrated Microban® | Integrated Microban® |
| Guarantee | 10 years (manufacturer) | 10 years (manufacturer) |
The kit also contains 3 rolls of Tape (15 m × 50 mm), 1 solvent-based Cleaner (1 L bottle), plus 1 pair of gloves and 1 utility knife included free.
Frequently asked questions about insulating a Ford Transit Custom L2H1
How can I tell if my Transit Custom is an L2H1?
The Transit Custom panel van comes with a short (L1) or long (L2) wheelbase and a standard (H1) or high (H2) roof. Measure the usable floor length and interior height: approximately 2,554 mm for L1 and 2,921 mm for L2, and 1,406 mm for H1 and 1,778 mm for H2.
Do I need DIY experience to install this kit?
No. The insulation is self-adhesive and can be cut with the utility knife included free in the kit: clean, cut, stick, then seal the joints with Tape. The six steps in the installation section are all you need, and the video shows you how.
Do I need to add glue?
No, the self-adhesive side of Armaflex ChezMoi sticks directly to the metal. The Cleaner is only used to degrease it so the adhesive bonds properly.
Is this kit suitable for a Ford Tourneo Custom?
It is designed for a Transit Custom panel van being converted into a campervan. The Ford Tourneo Custom, a glazed passenger version with an existing interior trim, does not have the same areas to insulate: measure the areas you need to cover before choosing how much Armaflex to buy.
Can I double the thickness for very cold weather?
Yes, you can layer two sheets in exposed areas if you drive in very cold conditions. You will need to add rolls of Armaflex ChezMoi 19 mm to the kit.
Armaflex ChezMoi or Armaflex AF: what’s the difference?
Armaflex ChezMoi is the successor to Armaflex AF for vehicle conversions: the same self-adhesive foam, with fire performance tested to the FMVSS automotive standard. Our article compares the two ranges point by point.
Is this kit suitable for the Transit Custom sold since 2024?
Yes. The current Transit Custom is longer but lower: the L2H1 kit covers its surfaces, except for the cab partition.
Complete the insulation and interior finish of your Ford Transit Custom L2H1
This kit insulates the vehicle’s metal surfaces in one go. For more options using environmentally responsible materials, explore our campervan insulation kits.
For the floor, add an underlay of 4 mm cork on a roll beneath your flooring: it reduces the feeling of a cold floor and reduces vibrations and road noise. Explore the full cork insulation range.
To cover the insulation, Heode offers wood panelling for the 2012–2023 Transit Custom: side walls, ceiling and non-slip floor. Find them in the Ford Custom 2012–2023 category, and products for the current generation in the Ford Custom since 2024 category.
To finish the walls, start with a stretch carpet lining sample: you can choose the colour (light grey, dark grey, anthracite, black or beige) in your van before ordering the van carpet lining.
-
Best selling