Easy-fit Armaflex ChezMoi insulation kit for Ford Transit Custom L1H2
Easy-fit Armaflex ChezMoi insulation kit for Ford Transit Custom L1H2
Ready-to-fit insulation kit for the Ford Transit Custom L1H2: 28 m² of self-adhesive Armaflex ChezMoi, with everything you need for installation.
- 1 roll of Armaflex ChezMoi 10 mm (10 m²)
- 3 rolls of Armaflex ChezMoi 19 mm (18 m²)
- 3 rolls of Tape (15 m × 50 mm)
- 1 bottle of Cleaner (1 L)
- 1 pair of gloves and 1 utility knife included free
Integrated vapour barrier, no additional glue needed, 10-year manufacturer’s warranty.
Quantities calculated for the Ford Transit Custom L1H2, excluding the cab partition.
Limit condensation in your Ford Transit Custom L1H2: 28 m² of Armaflex ChezMoi
The closed cells of Armaflex ChezMoi provide an integrated vapour barrier (μ> 7 000): applied to the metal bodywork of a Ford Transit Custom L1H2, it limits condensation without the need for an additional vapour control layer. This kit contains the quantities calculated for the Transit Custom L1H2: 1 roll of 10 mm insulation, 3 rolls of 19 mm insulation, 3 rolls of Tape and 1 bottle of Cleaner, with a free pair of gloves and utility knife.
Armaflex ChezMoi is an elastomeric foam made in Europe using Armacell technology. Its self-adhesive side sticks directly to cleaned metal bodywork, with no additional glue needed. It insulates the entire metal surface, including the ceiling.
With a thermal conductivity of 0.035 W/(m·K) and a service temperature range of −50 °C to +85 °C, it insulates against both cold and heat, whether you convert your Transit Custom into a campervan or keep it as a work van. Its A+ rating (ISO 16000, VOC-free) and Microban® antimicrobial treatment integrated into the material matter in a space where you sleep. Its fire performance meets the automotive FMVSS standard, and the manufacturer guarantees the material for 10 years.
The kit is straightforward to use: 10 mm insulation for the floor and pillars, 19 mm insulation for the walls and ceiling, Tape to seal the joints and Cleaner to clean the metal bodywork before installation.
Armaflex ChezMoi 19 mm: insulate the walls and ceiling
The 19 mm insulation is the standard thickness for large surfaces. It provides the most insulation where space allows: the Transit Custom’s side walls, doors and ceiling. The kit contains 3 rolls, covering 18 m².
- Thickness: 19 mm
- Pack size: 6 m² roll (6 m × 1 m)
- Thermal conductivity: λ = 0.035 W/(m·K) at 0 °C
- Vapour barrier: integrated, μ> 7 000
- Service temperature: −50 °C to +85 °C
- Fire performance: automotive FMVSS standard
- Air quality: A+ rating (ISO 16000), VOC-free
- Antimicrobial treatment: Microban® integrated into the material
- Warranty: 10 years (manufacturer)

Armaflex ChezMoi 10 mm: insulate the floor and pillars
The 10 mm insulation fits where space is limited: the floor, deep structural reinforcements, wheel arches and pillars. It preserves the internal height while insulating the metal bodywork. The kit contains 1 roll, covering 10 m².
- Thickness: 10 mm
- Pack size: 10 m² roll (10 m × 1 m)
- Thermal conductivity: λ = 0.035 W/(m·K) at 0 °C
- Vapour barrier: integrated, μ> 7 000
- Service temperature: −50 °C to +85 °C
- Fire performance: automotive FMVSS standard
- Air quality: A+ rating (ISO 16000), VOC-free
- Antimicrobial treatment: Microban® integrated into the material
- Warranty: 10 years (manufacturer)

Tape, Cleaner, gloves and utility knife: preparation, cutting and joints
Tape seals the joints between sheets to limit thermal bridges, while Cleaner degreases the metal bodywork for good adhesion. The kit contains 3 rolls of Tape, providing 45 m of tape, and 1 bottle of Cleaner. A pair of gloves and a utility knife are included free for handling and cutting the insulation.
- Tape: 15 m × 50 mm roll, adhesive, 3 rolls in the kit
- Cleaner: solvent-based Armaflex cleaner, 1 L bottle, applied with a cloth, 1 bottle in the kit
- Gloves: 1 pair, included free with the kit
- Utility knife: 1, included free with the kit

Compatibility: Ford Transit Custom L1H2
The kit is sized for the load area of a 2012 to 2023 Ford Transit Custom L1H2 panel van: 2 554 mm long, 1 775 mm wide and 1 778 mm high, with 1 351 mm between the wheel arches. These dimensions are indicative: measure your vehicle before installation, especially if it has already been converted.
The Transit Custom sold since 2024 has a different load area: this kit is calculated for the 2012-2023 generation.
Please note: The partition separating the load area from the cab is not included in the surface areas covered by the kit.
The closed cells of Armaflex ChezMoi already act as a vapour barrier, so there is no need for an additional vapour control layer.
Other Transit Custom sizes: L1H1, L2H1 and L2H2.
How do I install the Armaflex ChezMoi kit in a Ford Transit Custom L1H2?
Armaflex ChezMoi is self-adhesive: it installs without glue, using a few simple tools, and requires no special skills. Just follow the steps in order. Our blog post on installing Armaflex explains each step in detail.
- Prepare the walls. Identify the areas to insulate. If you plan to install wood panelling, fit your mounting battens first.
- Clean the walls before installation. Dampen a clean cloth with Cleaner and wipe down all the metal bodywork: it must be clean and free of grease for the adhesive to stick. Cleaner contains a solvent and gives off fumes: wear a mask and work outside if possible.
- Mark out. Transfer the dimensions of each area onto the non-adhesive side of the insulation, starting with the floor and pillars (10 mm), then the walls and ceiling (19 mm).
- Cut to size. Put on the free gloves and cut the sheets to shape with the utility knife included in the kit, or with an Armacell knife set if you prefer. The foam cuts cleanly.
- Stick in place. Peel off the protective film as you go, pressing the sheet onto the metal bodywork from the centre outwards to remove trapped air.
- Seal the joints. Apply Tape to every join between two sheets to limit thermal bridges.
Kit technical specifications
| Specification | Armaflex ChezMoi 10 mm | Armaflex ChezMoi 19 mm |
|---|---|---|
| Quantity in the kit | 1 roll | 3 rolls |
| Area covered by the kit | 10 m² | 18 m² |
| Pack size | 10 m × 1 m | 6 m × 1 m |
| Recommended areas | Floor, pillars | Walls, ceiling |
| Thermal conductivity | λ = 0.035 W/(m·K) at 0 °C | λ = 0.035 W/(m·K) at 0 °C |
| Water vapour resistance | μ> 7 000 | μ> 7 000 |
| Service temperature | −50 °C to +85 °C | −50 °C to +85 °C |
| Fire performance | Automotive FMVSS standard | Automotive FMVSS standard |
| Air quality | A+ (ISO 16000), VOC-free | A+ (ISO 16000), VOC-free |
| Antimicrobial treatment | Integrated Microban® | Integrated Microban® |
| Warranty | 10 years (manufacturer) | 10 years (manufacturer) |
The kit also contains 3 rolls of Tape (15 m × 50 mm), 1 bottle of solvent-based Cleaner (1 L), plus a free pair of gloves and utility knife.
Frequently asked questions about insulating a Ford Transit Custom L1H2
How can I tell whether my Transit Custom is an L1H2?
The Transit Custom panel van comes with a short (L1) or long (L2) wheelbase and a standard (H1) or high (H2) roof. Measure the usable floor length and internal height: approximately 2 554 mm for L1 and 2 921 mm for L2, and 1 406 mm for H1 and 1 778 mm for H2.
Do I need DIY experience to install this kit?
No. The insulation is self-adhesive and can be cut with the utility knife included free in the kit: clean, cut, stick, then seal the joints with Tape. The six steps in the installation section are all you need, and the video shows you how.
Do I need to add glue?
No, the self-adhesive side of Armaflex ChezMoi sticks directly to the metal bodywork. Cleaner is used only to degrease the surface so the adhesive bonds properly.
Is this kit suitable for a Ford Tourneo Custom?
It is designed for a Transit Custom panel van being converted into a campervan. The Ford Tourneo Custom is a glazed passenger version that is already lined, so it does not have the same surfaces to insulate: measure the areas you need to cover before deciding how much Armaflex you need.
Can I double the thickness for very cold weather?
Yes, you can layer two sheets in exposed areas if you drive in very cold conditions. You will need to add rolls of Armaflex ChezMoi 19 mm to the kit.
Armaflex ChezMoi or Armaflex AF: what’s the difference?
Armaflex ChezMoi is the successor to Armaflex AF for vehicle conversions: the same self-adhesive foam, with fire performance to the automotive FMVSS standard. Our article compares the two ranges point by point.
Is this kit suitable for the Transit Custom sold since 2024?
This kit is calculated for the 2012 to 2023 Transit Custom. The current generation has a different body: measure your vehicle before ordering.
Complete the insulation and finish of your Ford Transit Custom L1H2
This kit insulates the metal bodywork in one go. To go further with eco-responsible materials, explore our campervan insulation kits.
For the floor, add a layer of 4 mm cork underlay on a roll beneath your floor covering: it reduces the cold-floor effect and reduces vibrations and road noise. Explore the full cork insulation range.
To finish the floor, Heode offers a non-slip floor cut to fit the 2012 to 2023 Transit Custom, ready to install over the insulation. Find our linings in the 2012 to 2023 Ford Custom category.
For the wall finish, start with a stretch carpet lining sample: you can choose the colour (light grey, dark grey, anthracite, black or beige) in your van before ordering the van carpet lining.
-
Best selling